Interra Combo ITR516-16A

• Lighting control can be made with every output of the combo switch actuator.
• Heating control can be made with every output of the combo switch actuator.
• Every output of the combo module can be configured as shutter/blind provided that 2 consecutive outputs are available.
• Shutter/blind 24V configuration can be with 4 outputs of the combo module. However, it is only available in the first four outputs of the (*) blocks.
• Fan Coil 2 pipes configuration can be with 4 outputs of the combo module. However, it is only available in the first four outputs of the (*) blocks.
• Fan Coil 4 pipes configuration can be with 5 outputs of the combo module. However, it is only available in the first five outputs of the (*) blocks.
• The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.
• Last situation memory against power failure.
(*): Each block consists of every 6 outputs of the combo module that is starts from C1 output.

Interra Combo ITR508-16A

• Lighting control can be made with every output of the combo switch actuator.
• Heating control can be made with every output of the combo switch actuator.
• Every output of the combo module can be configured as shutter/blind provided that 2 consecutive outputs are available.
• Shutter/blind 24V configuration can be with 4 outputs of the combo module. However, it is only available in the first four outputs of the (*) blocks.
• Fan Coil 2 pipes configuration can be with 4 outputs of the combo module. However, it is only available in the first four outputs of the (*) blocks.
• Fan Coil 4 pipes configuration can be with 5 outputs of the combo module. However, it is only available in the first five outputs of the (*) blocks.
• The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.
• Last situation memory against power failure.
(*): Each block consists of every 6 outputs of the combo module that is starts from C1 output.

Description : 

• ITR830-003 is a air conditioner gateway that used for monitoring and control all the functioning parameters of Daikin Industries air conditioners via KNX bus line.
• Daikin Sky & VRV AC - KNX Gateway is compatible with models in Sky & VRV types categorized in compatibility list sold by Daikin Industries.
• Daikin Sky & VRV AC - KNX Gateway has easy installation feature and can be installed inside the own AC indoor unit or a proper location away from the air conditioner, it connects one side directly to the electronic circuit of the AC indoor unit and in the other side directly to the KNX bus.

Functions : 

• TR830-003 device, provides complete bi-directional integration of Daikin Sky & VRV air conditioners with KNX bus.
• Includes 4 logical advanced parameters, each logical parameter have up to 4 inputs and can be configured as AND, OR & XOR.
• Includes 8 advanced converter parameters, each converter has four operations math calculations according to input type.
• Logic and converter parameters can be used for energy savings, configurable scenes, temperature limits etc.
• The Daikin air conditioner unit provides error notifications for errors that may occur in exceptional cases.

Interra DMX Gateway ITR831-001 : 

Functions : 

• 3 working modes: DMX recorder mode, DMX dimming mode (KNX to DMX) and DMX to KNX conversion mode (1bit, 1byte datapoint)
• Supported communication signal: DMX512-1990, ArtNet DMX
• Store and playback up to 24 programs, maximum recording time : 4 hours
• DMX recorder mode supports switching and dimming up to 48 channels, which means controlling DMX device via KNX system.
• DMX to KNX conversion mode supports switching and absolute dimming via DMX signal for up to 48 channels, which means controlling KNX system via DMX storage control function.
• DMX output signal can be used to control devices with built-in DMX protocol port for LED color control, such as computer light, moving head light, laser light, etc.
• DMX input control functions for KNX system include：Sequence control, Scene control, Switch control, Relative dimming, Absolute dimming.

Requires a 24V power supply (example: L&D 15W 24V power supply)

Interra ITR401-001 

Description : 

• ITR401-001 flood detector is equipped with KNX system and used to detect the presence of water-based liquids at any desired location such as basements, water tanks or any hidden areas were water can leak without notice.
• ITR401-001 is an early warning system that notifies you through KNX bus. By catching it early, you may be able to avoid expensive repairs and loss of treasured items.
• Due to the existence of the KNX system, users have a chance to arrange any kind of additional alert system.

Features : 

• Module alive beacon notification.
• Device is eligible to alert the users via buzzer, LED or relay output. Users can activate the LED or buzzer via ETS parameters.
• The LED is available for two colour status which operated inversely as green and red. 
• Alarm detection delay selections are available. Users can determine the delay via ETS parameters.
• Device has a sensing probe extends downward up to 25cm. The sensing probe operates determined alarm condition when water presence is detected.
• Suspending the alarm for desired duration feature is available.
• Alarm reset feature is available.

Interra Just Touch ITR328-1002 : 

• Pushbutton has Switching, toggle, dimming, shutter/blinds, thermostat controls, scenes, value, 2 channels, step switching mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heating and Cooling modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC), CO2 concentration (from bus), humidity percentage, operating modes, fan levels, on/off indicators, warnings and locking status are displayed on screen.
• Fan controller available with different speed indicators.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature, humidity and air quality levels.
• RGB LED control.