Zennio KLIC-MITTv2 Mitsubishi Air conditionner controller (Residential Range) ZCLMITTV2

Zennio gateway to control Mitsubishi Electric air conditioning units through IT terminal connector from KNX system in a bidirectional way. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry contact binary inputs (switches, sensors or push buttons) and 10 logical functions.

KNX LOGIC INTERFACE FOR DAIKIN AIR CONDITIONER CONTROL (INDUSTRIAL RANGE)

• Does not require any power supply other than that of the BUS.
• Designed to be installed on DIN rail in electrical panels or in junction boxes (flush-mounted box).
• KLIC-DI offers bi-directional communication with the air conditioner units.
• Integrated KNX bus coupling unit.
• Complies with CE directives.

Description :

LED: Indicates whether the device is in programming mode (red) or in KNX/air conditioner communication (green/blue).
Communication cable: 2-wire cable, directly to the P1/P2 connectors on either the PCB board of the indoor unit or the wired control unit.
You will find the list of compatible models for this product in the documents.

KNX LOGIC INTERFACE FOR DAIKIN AIR CONDITIONER CONTROL ( LOW TEMPERATURE ALTHERMA RANGE )

• Small size: 90 x 90 x 35mm (2 DIN units)
• Does not require any power supply other than that of the Bus.
• Mounting on DIN rail (EN 50022), pressure mounted.
• KLIC DA offers half-duplex communication with hidrokit LT units.
• Integrated KNX BUS coupling unit.
• Complies with CE directives

You will find the list of compatible models for this product in the documents.

Zennio KLIC-LG1 / KLIC-LG1vT  KNX air conditioner controller ZCL-LG1 / ZCLLG1VT

KLIC-LG1 replaced by Temporary Version KLIC-LG1vT

The replacement of the product is due to the worldwide situation of out-of-stock components that we are experiencing and that forced us to change the microcontroller by another one of the same model but different capacity to ensure the continuity of deliveries.

Replacement of references in your order with devices (vT) Temporary version

KNX to LG interface

• Zennio Gateway to control LG air conditioning units from the KNX system in a bidirectional way. It includes 3 analog/digital inputs for temperature probes, motion detectors or potential-free binary contacts (push-buttons, sensors or switches) and 10 logic functions. 
• Please refer to the documents for a list of compatible models.

Zennio KLIC-FJ - KLIC-FJVT air conditioner control Fujitsu ZCL-FJ- ZCL-FJVT

KLIC-FJ replaced by Temporary Version KLIC-FJVT

The replacement of the product is due to the worldwide situation of out-of-stock components that we are experiencing and that forced us to change the microcontroller by another one of the same model but different capacity to ensure the continuity of deliveries.

Replacement of references in your order with devices (vT) Temporary version

Zennio Gateway for controlling Fujitsu, General, Hyasu and Fuji Electric air conditioning units from the KNX system bidirectionally. It includes 3 analog-digital inputs for temperature sensors, motion detectors or potential-free binary contacts (push buttons, sensors or switches) and 10 logic functions.

You will find in the documents the list of models compatible with this product.

Zennio KLIC-TS Toshiba KNX air conditioner controller ZCL-TS

KNX interface to Toshiba

Zennio Gateway for controlling Toshiba air conditioning units from the KNX system in a bidirectional way. It includes 3 analogue-digital inputs for temperature probes, motion detectors or potential-free binary contacts (push-buttons, sensors or switches) and 10 logic functions. 

You will find in the documents the list of models compatible with this product.

Zennio KLIC-PA Panasonic KNX air conditioner controller ZCLPA

KNX interface to Panasonic

Zennio Gateway for the bi-directional control of Panasonic air conditioning units from the KNX system. It includes 3 analog/digital inputs for temperature probes, motion detectors or potential-free binary contacts (push buttons, sensors or switches) and 10 logic functions. 

Please refer to the documents for a list of compatible models.

KNX LOGIC INTERFACE FOR DAIKIN AIR CONDITIONER CONTROL (RESIDENTIAL RANGE)

• Can be placed in a junction box (60 mm x 60 mm) or electrical panel
• KLIC-DD allows bi-directional communication with air conditioning units.
• Integrated KNX bus coupling unit.
• Backup of all data in the event of a loss of BUS power.
• Complies with CE directives.

Description :

Led: Indicates whether the device is in programming mode (red) or in KNX/air conditioner communication (green/blue).
Communication cable: 5-wire cable, directly on the PCB board of the indoor unit (S21). Length 800 mm.
You will find in the documents the list of models compatible with this product.