PRESENCE LIGHT 180° B-KNX

• Presence detector (PIR)
• Type of protection IP 54
• Mixed light measurement
• Passive infra-red presence detector for wall installation
• Half-round detection area 180°, Ø 16 m, (100 m2 )
• Presence and brightness-dependent control for lighting and HVAC systems
• Choice of fully or semi-automatic lighting control
• Connection option for sensors or switches for manual switching with automatic recognition
• Adjustable sensitivity - Can be configured remotely
• Installation with mechanical stop
• Lighting control with brightness threshold value and self-learning switch-off delay
• Pulse function for staircase time switch
• Presence output with switch-on and switch-off delay
• Room monitoring with selective movement detection
• Parameters can be selected for subsequent changes
• Test operation mode checks the detection area and brightness threshold

Zennio Presentia W0 - ZPDW0-ZPDW0VT

ZPDW0  replaced by Temporary Version ZPDW0VT

Check in the PDF Retrieved references & Temporary references in Documents

Motion detector for in-wall flush mounting into 55 x 55 mm frame, with a detection area of 180º and up to 10 meters length of detection. Fitting with Tecla 55, Flat 55 family and Zennio ZS55 frames, switches and sockets. It includes several channels to be configured for lighting switching control according to luminosity threshold or according to motion detection only. It has two independent sensors whose sensitivity settings can be adjusted for each sensor individually. Master/slave configuration allows using several detectors for larger areas. Installation in standard mounting box with 55 x 55 frames of 1/2/3/4 module (white, anthracite or silver). Frame not included.

compatible frame ZS55.

Available models: Standard Whit/Anthracite/Silver.

Surface-mounted housing presence light

• Frame for surface mounting the presence detector
• Colour: Pure white

PRESENCE LIGHT 360° B-KNX

• Presence detector (PIR)
• Type of protection IP 54
• Mixed light measurement
• Passive infra-red presence detector KNX for flush-mounted ceiling installation
• Square detection area 360°, 7 x 7 m, (49 m2 ) at mounting height 3 m
• 2 channels light and 2 channels presence
• Presence and brightness-dependent control for lighting and HVAC systems
• Choice of fully or semi-automatic lighting control
• Connection option for sensors or switches for manual switching with automatic recognition
• Adjustable sensitivity - Can be configured remotely
• Installation with mechanical stop
• Lighting control with brightness threshold value and self-learning switch-off delay
• Pulse function for staircase time switch
• Presence output with switch-on and switch-off delay
• Room monitoring with selective movement detection
• Parameters can be selected for subsequent changes
• Test operation mode checks the detection area and brightness threshold

Theben theLuxa P300 KNX WH 1019610

• Motion detector (PIR)
• Automatic lighting control based on presence and brightness
• For integration into KNX building systems
• For outdoor use
• For installation on walls and ceilings
• Integrated temperature sensor
• For larger, commercial outdoors properties such as offices, public buildings, hotels, schools, car parks and warehouses
• Easy to program with KNX ETS software
• Adjustable brightness switching value and switch-off delay
• Sensitivity can be reduced
• Area limit via lens attachment
• Mixed light measurement
• Teach-in of current brightness value possible
• Pulse function
• Test function for checking detection area
• Installation on flush-mounted socket possible (60 mm)
• Single-handed plug-in installation
• Instant start-up possible via factory preset
• Controls are place protected
• Corner angle includedSpacer and corner angle included

Theben theLuxa P300 KNX BK 1019611

• Motion detector (PIR)
• Automatic lighting control based on presence and brightness
• For integration into KNX building systems
• For outdoor use
• For installation on walls and ceilings
• Integrated temperature sensor
• For larger, commercial outdoors properties such as offices, public buildings, hotels, schools, car parks and warehouses
• Easy to program with KNX ETS software
• Adjustable brightness switching value and switch-off delay
• Sensitivity can be reduced
• Area limit via lens attachment
• Mixed light measurement
• Teach-in of current brightness value possible
• Pulse function
• Test function for checking detection area
• Installation on flush-mounted socket possible (60 mm)
• Single-handed plug-in installation
• Instant start-up possible via factory preset
• Controls are place protected
• Corner angle includedSpacer and corner angle included

Zennio - Surface installation accessory for EyeZen motion detectors - ZACEZENSFW

Accessory for EyeZen devices family that allows the installation of motion detectors EyeZen IN, EyeZen TP and EyeZen RF devices on ceiling surface. Made of polycarbonate, it is available in white (Ref. ZACEZENSFW) and black (Ref. ZACEZENSFA) colors, both with matte finish.

Zennio - Surface installation accessory for EyeZen motion detectors - ZACEZENSFA

Accessory for EyeZen devices family that allows the installation of motion detectors EyeZen IN, EyeZen TP and EyeZen RF devices on ceiling surface. Made of polycarbonate, it is available in white (Ref. ZACEZENSFW) and black (Ref. ZACEZENSFA) colors, both with matte finish.