Jung 230161SR

Rail mounting device, 8 rail units
with manual electronic operation and LED status indication
Project design and commissioning with ETS5 or a more recent version.
ETS product family: Output
Product type: Binary output

Intended use

• Switching of electrical loads with floating contacts
• Switching of electrically-driven blinds, shutters, awnings and similar hangings
• Mounting on DIN rail according to EN 60715 in distribution boxes

 
Product characteristics

• Outputs can be operated manually, construction site mode
• Feedback in manual mode and in bus mode
• Disabling of individual outputs manually or via bus
• Central functions
• Cyclical monitoring
• Can be updated with the ETS Service App

Characteristics switching operation

• Operation as NO or NC contacts
• Feedback function
• Logic operation and forcing function
• Central switching function with collective feedback
• Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function
• Scene function
• Operating hours counter

Characteristics blinds operation

• Suitable for 230 V AC motors
• Operation modes ‘Blind with slats’, ‘Shutter/awning’, ‘Ventilation flap/skylight’
• Blind/shutter position directly controllable
• Slat position directly controllable
• Feedback of movement status, blind/shutter position and slat position
• Cyclical feedback during movement
• Forced position through higher-level controller
• Safety function: rain alarm, frost alarm, 3 independent wind alarms
• Sun protection function with auto Heating/Cooling
• Scene function

The total current of two adjacent outputs must not exceed 20 A.

JUNG KNX switch actuator 24-gang KNX blinds actuator 12-gang 230241SR

rail mounting device, 12 rail units
with manual electronic operation and LED status indication
Project design and commissioning with ETS5 or a more recent version
ETS product family: Output
Product type: Binary output mix

Intended use

• Switching of electrical loads with floating contacts
• Switching of electrically-driven blinds, shutters, awnings and similar hangings
• Mounting on DIN rail according to EN 60715 in distribution box

JUNG KNX switch actuator 6-gang KNX blinds actuator 3-gang 230061SR

rail mounting device, 4 rail units
with manual electronic operation and LED status indication
Project design and commissioning with ETS5 or a more recent version
ETS product family: Output
Product type: Binary output

Intended use

• Switching of electrical loads with floating contacts
• Switching of electrically-driven blinds, shutters, awnings and similar hangings
• Mounting on DIN rail according to EN 60715 in distribution box

 
Product characteristics

• Outputs can be operated manually, construction site mode
• Feedback in manual mode and in bus mode
• Disabling of individual outputs manually or via bus
• Central functions
• Cyclical monitoring
• KNX Data Secure compatible with ETS 5.7.3 or higher
• Can be updated with the ETS Service App

Single push button mechanism

To complete your button, you need a simple cover and a finishing frame. Below is the list of availability in our catalogue :

- simple

- duplicate

- triple

- quadruple

- quintuple

Mechanism RJ 45 category 6 / Class E (Only screw fixing. Without fixing claws.)

• Connect a computer, Wifi terminal, printer with a bandwidth of up to 10 gigabit/sec.
• Also connect a phone LSA-Plus shielded connection
• Articulated cable entry prevents bending of the cable.
• Intended for flush-mounting in a flush-mounted box.
• Version: 1 x 8 contacts

JUNG série A Enjoliveur prise simple RJ45 - A569-1PLUAWW

KNX push button BCU - middle position -

Function: ON/OFF, roller shutters, variation
LED: always OFF/always ON/LED object, LED presentation
The LED is intended for orientation or status indication, adjustable through the
parameters.

Operating exemple :

• General OFF/ON control of the KNX lighting and one ON/OFF lighting
  or
• Control of 2 lights ON/OFF function
  or
• Control of 1 lights ON and OFF function
• Control of 2 lights ON/OFF/CLIMITER function
• Control of 1 roller shutter

The JUNG BP/BCU mechanisms are fitted with the finishing trims of the AS, A series, CD, SL and LS (SL series only button position).
Depending on the model of BP/BCU (1-way or 2-way) it is possible to use single or double button covers with or without indicator light.
Two white LEDs are intended to become orientation or status information depending on the selected parameters.
The "intermediate position" version can carry out a command by pressing the button up and down, whereas the "button position" version can only carry out a command by pressing the button down.
The BP/BCU operate with an application, i.e. they consist of a mechanism (hardware) and a program (software). With the aid of the application program it is possible to parameterize the functions and link group addresses (see JUNG database).

Please note that not all covers are compatible with this pushbutton. Here is a list of compatible covers in our catalogue:

- single cover

- single cover with indicator light

And in order to complete your knob, it is necessary to have a finishing frame. Below is the list of availability in our catalogue:

- 1-gang

- 2-gang

- 3-gang

- 4-gang

- 5-gang

Simple push-button bipolar closing mechanism

To complete your button, you need a simple hubcap and a finishing frame. Below is the list of availability in our catalogue :

- simple

- duplicate

- triple

- fourfold

- fivefold

Simple push-button bipolar closing mechanism

To complete your button, you need a simple hubcap and a finishing frame. Below is the list of availability in our catalogue :

- simple

- duplicate

- triple

- fourfold

- fivefold