Zennio Tecla RGB XL 4/6/8/10 keys - ZVITRXL

RGB Backlit capacitive touch switch

Polycarbonate capacitive touch switches with customisable icons. 4, 6, 8 or 10 button versions all available with RGB backlit icons that adapt according to proximity sensor. It incorporates an internal temperature probe and thermostat as well as 2 analog-digital inputs to be configured as binary inputs, sensors, push buttons, temperature probes or motion detectors. Installation in European, British, Italian, Australian and American back boxes. It is compatible with KNX Secure.
Accessories: temperature probe and motion sensor.

Zennio offers various finishes to suit a wide range of decorative environments, using colour references based on international standards. This table lists the available finishes along with their corresponding reference to facilitate identification and selection.

Customized versions of this product require personalization via the zennio Touch-MyDesign tool. After ordering this product, please send us your personalization reference by email to contact@light-domotique.fr

Colours shown are based on the RAL system, an international norm widely used to define hues with precision.

Siemens KNX Room operator unit - QMX3.P34 - QMX3.P34-1BSC

Room operator unit KNX with temperature sensor, segmented backlit display, touchkeys, black

• • Functions:
    

    • Temperature sensor
    • Segmented backlit display and touchkeys

    Additional functionalities GAMMA

    • Temperature control, adjustable as PWM control and/or modulating control (PID algorithm), for pure heating mode, pure cooling mode, heating and cooling mode
    • Operating modes switchable via KNX and/or display: Comfort mode, Pre-Comfort, energy savings and protection mode
    • Adjustable commissioning and control parameters for radiated heating, slow and fast, floor heating slow and fast
    • Integrated bus coupling unit
    • 3 independently adjustable switching values for CO2 concentration and relative air humidity for air quality control
    • Actuating variable for 1, 2, or 3-stage fans (humidity and CO2)
    • Actuating variable for 1, 2, or 3-point positioning signal (humidity and CO2)
    • Setpoint for room temperature and relative humidity and CO2 concentration adjustable via KNX

Interra Just Touch ITR328-1002 : 

• Pushbutton has Switching, toggle, dimming, shutter/blinds, thermostat controls, scenes, value, 2 channels, step switching mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heating and Cooling modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC), CO2 concentration (from bus), humidity percentage, operating modes, fan levels, on/off indicators, warnings and locking status are displayed on screen.
• Fan controller available with different speed indicators.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature, humidity and air quality levels.
• RGB LED control.

Interra Just Touch ITR328-1001 : 

• Pushbutton has Switching, toggle, dimming, shutter/blinds, thermostat controls, scenes, value, 2 channels, step switching mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heating and Cooling modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC), CO2 concentration (from bus), humidity percentage, operating modes, fan levels, on/off indicators, warnings and locking status are displayed on screen.
• Fan controller available with different speed indicators.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature, humidity and air quality levels.
• RGB LED control.

Siemens KNX  room thermostat - RDF800KN - RDF800KN/VB

Flush mount touch KNX room thermostat for 2-/4-pipe FCU with on/off output and 2x universal input, fit for both round and square conduit boxes

CJC - LUCIA - KNX - 1 way - CJC7201

Delivery time 8 weeks, manufactured to order.

The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation

CJC - LUCIA - KNX - 2 way - CJC7202

Delivery time 8 weeks, manufactured to order.

The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation

CJC - LUCIA - KNX - 4 way - CJC7204

Delivery time 8 weeks, manufactured to order.

The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation