Zennio-MAXinBOX 88 - 8outputs-8inputs-knx-actuator-ZIOMB88

KNX multifunction actuator with KNX Secure - 8 outputs 16 A / 8 inputs A/D

Multifunction sensor-actuator for DIN-rail (4 units) with 8 outputs (16 A C-load) which offer multiple configurations as shutter channels or individual outputs. It allows manual control of its outputs through the push buttons on the cover. It includes 20 independent logical functions. In addition, it incorporates 8 analog/digital inputs that may be configured as binary inputs for sensors and potential free push buttons, as temperature probe inputs or as motion sensor inputs. Four room thermostats to control heating/cooling systems are included. It is compatible with KNX Secure. Accessories: temperature probe and motion sensor.

Zennio-MAXinBOX 1212 - KNX multifunction actuator with KNX Secure - 12 outputs 16 A / 12 inputs A/D - ZIOMB1212

Multifunction sensor-actuator for DIN-rail (6 units) with 12 outputs (16 A C-load) which offer multiple configurations as shutter channels, up to 12 independent outputs of 16 A (capacitive loads supported) and up to 3 blocks of 2-pipes fan coil controller. It allows manual control of its outputs through the push buttons on the cover. It includes 10 independent logical functions. In addition, it incorporates 12 analog/digital inputs that may be configured as binary inputs for sensors and potential free push buttons, as temperature probe inputs (up to 8) or as motion sensor inputs (up to 8). Four room thermostats to control heating/cooling systems are included. It is compatible with KNX Secure. Accessories: temperature probe and motion sensor. 

JUNG KNX switch actuator 6-gang KNX blinds actuator 3-gang 230061SR

rail mounting device, 4 rail units
with manual electronic operation and LED status indication
Project design and commissioning with ETS5 or a more recent version
ETS product family: Output
Product type: Binary output

Intended use

• Switching of electrical loads with floating contacts
• Switching of electrically-driven blinds, shutters, awnings and similar hangings
• Mounting on DIN rail according to EN 60715 in distribution box

 
Product characteristics

• Outputs can be operated manually, construction site mode
• Feedback in manual mode and in bus mode
• Disabling of individual outputs manually or via bus
• Central functions
• Cyclical monitoring
• KNX Data Secure compatible with ETS 5.7.3 or higher
• Can be updated with the ETS Service App

Zennio MAXinBOX 8 V4 - ZIOMB8V4

KNX multifunction actuator with KNX Secure - 8 outputs 16 A

Multifunction actuator for DIN-rail (4.5 units) with 8 outputs (16 A C-Load) which offer multiple configuration as shutter channels, as individual outputs or as blocks of 2-pipes fan coil controller. It allows manual control of its outputs through the push buttons on the cover. It includes 20 independent logical functions. It is compatible with KNX Secure. Accessories: AC/DC shutter adapters.

Schneider KNX - switch-blinds actuator 8-outputs -master-Secure- MTN6705-0008S

Can be installed in combination with the extension actuator (to obtain 16 or 24 outputs):

Schneider KNX - Switch-blinds actuator 8 outputs - extension - MTN6805-0008

 If your extension is not side by side with the master or the second extension you can use this cable:

Schneider KNX Cable flexible

The Schneider Electric device which is SpaceLogic KNX Switch Master, it is secure and reliable. Control your lighting, blinds, and shutters with possible advanced functionalities. Introducing the Modular Master Extension concept featuring standardized sizes and module prefab link. Achieving high component performance with KNX Secure communication. Control up to 4 blinds/roller shutters or switch 8 loads via make contacts. The function of switching channels or adjusting for those who are visually impaired can be customized to suit individual preferences. The blind/switch outputs have manual push button controls available for operation. You can choose to use KNX Data Secure communication through either ETS or eConfigure software. To increase the number of channels, simply connect SpaceLogic KNX Switch/Blind Extensions. A maximum of 2 Extensions can be connected to the Master, so up to 24 loads can be switched or 12 blind drives can be controlled. The nominal current is 16A and the nominal operational voltage is 250VAC, The frequency is 50-60Hz. The Motor load is 1000VA for each switch output. The nominal load for incandescent lamps is 2300W, for halogen lamps is 2300W, for LED is 200W, for capacitive load is 10AX with a maximum of 140µF. The relay has a maximum inrush current of 800 A/200 μs and a maximum of 165 A/20 ms for the inductive load of 10 A with a power factor of 0.6. The support is mounted using a DIN rail. The dimensions are (W) 8mm x (H) 12.4mm x (D) 15.7mm. The product is white in color. This device has an IP rating of IP20. The SpaceLogic KNX Module and Cable Link are available. Accelerate the delivery of your project by utilizing ETS Express commissioning or eConfigure software. Ensure data privacy protection with KNX Data Secure capabilities and certification.

Schneider KNX - switch-blinds actuator 8-outputs - extension -MTN6805-0008

paceLogic KNX Switch/Blind Extension. The SpaceLogic KNX Switch/Blind Extension is a switch actuator that extends the channels of a SpaceLogic KNX Switch/Blind Master or a SpaceLogic KNX Universal Dimming Master. For independent control of up to 4 blind/roller shutter drives or for switching up to 8 loads via make contacts. The function of the blind or switching channels is freely configurable.

 Must be installed in combination with the master actuator:

Schneider KNX - switch-blinds actuator 8 outputs : MTN6705-0008

Schneider KNX - switch-blinds actuator 8-outputs -master-Secure : MTN6705-0008S

Schneider KNX - DALI Broadcast Master 4 channels/32, Secure : MTN6725-0005S

With "Schneider KNX - Mixed actuator 8 outputs - extension - MTN6805-0008" a connector is supplied for side-by-side installation.

If your extension is not side by side with the master or the second extension you can use this cable:

Schneider KNX Cable flexible

Interra Combo ITR508-16A

• Lighting control can be made with every output of the combo switch actuator.
• Heating control can be made with every output of the combo switch actuator.
• Every output of the combo module can be configured as shutter/blind provided that 2 consecutive outputs are available.
• Shutter/blind 24V configuration can be with 4 outputs of the combo module. However, it is only available in the first four outputs of the (*) blocks.
• Fan Coil 2 pipes configuration can be with 4 outputs of the combo module. However, it is only available in the first four outputs of the (*) blocks.
• Fan Coil 4 pipes configuration can be with 5 outputs of the combo module. However, it is only available in the first five outputs of the (*) blocks.
• The functionalities for each output include among other things timing functions, logic gates, scenes, disabling function, forced, working hours counter, periodical monitoring and different configurations for feedback telegrams.
• Last situation memory against power failure.
(*): Each block consists of every 6 outputs of the combo module that is starts from C1 output.

Zennio-IndustrialBOX Current 8- KNX actuator 8 outputs 20 A - ZIOINBC8

Actuator for DIN-rail (8 units) with 8 individual outputs and industrial relays (20 A C-Load). It allows manual control of its outputs through switches that directly control the relays, independently of the power supply. It includes current measurement per output, so the current consumption of the loads in real-time can be monitored, also providing power and energy values. It incorporates 20 independent logical functions. It is compatible with KNX Secure.