Skip to content

Motion / presence sensors


  • Theben PresenceLight 180° B-KNX 2009815

    PRESENCE LIGHT 180° B-KNX

    • Presence detector (PIR)
    • Type of protection IP 54
    • Mixed light measurement
    • Passive infra-red presence detector for wall installation
    • Half-round detection area 180°, Ø 16 m, (100 m2 )
    • Presence and brightness-dependent control for lighting and HVAC systems
    • Choice of fully or semi-automatic lighting control
    • Connection option for sensors or switches for manual switching with automatic recognition
    • Adjustable sensitivity - Can be configured remotely
    • Installation with mechanical stop
    • Lighting control with brightness threshold value and self-learning switch-off delay
    • Pulse function for staircase time switch
    • Presence output with switch-on and switch-off delay
    • Room monitoring with selective movement detection
    • Parameters can be selected for subsequent changes
    • Test operation mode checks the detection area and brightness threshold

    214.00 €
  • Theben PresenceLight 360° B-KNX 2009000

    PRESENCE LIGHT 360° B-KNX

    • Presence detector (PIR)
    • Type of protection IP 54
    • Mixed light measurement
    • Passive infra-red presence detector KNX for flush-mounted ceiling installation
    • Square detection area 360°, 7 x 7 m, (49 m2 ) at mounting height 3 m
    • 2 channels light and 2 channels presence
    • Presence and brightness-dependent control for lighting and HVAC systems
    • Choice of fully or semi-automatic lighting control
    • Connection option for sensors or switches for manual switching with automatic recognition
    • Adjustable sensitivity - Can be configured remotely
    • Installation with mechanical stop
    • Lighting control with brightness threshold value and self-learning switch-off delay
    • Pulse function for staircase time switch
    • Presence output with switch-on and switch-off delay
    • Room monitoring with selective movement detection
    • Parameters can be selected for subsequent changes
    • Test operation mode checks the detection area and brightness threshold

    214.00 €
  • Theben theLuxa P300 KNX WH 1019610

    Theben theLuxa P300 KNX WH 1019610

    • Motion detector (PIR)
    • Automatic lighting control based on presence and brightness
    • For integration into KNX building systems
    • For outdoor use
    • For installation on walls and ceilings
    • Integrated temperature sensor
    • For larger, commercial outdoors properties such as offices, public buildings, hotels, schools, car parks and warehouses
    • Easy to program with KNX ETS software
    • Adjustable brightness switching value and switch-off delay
    • Sensitivity can be reduced
    • Area limit via lens attachment
    • Mixed light measurement
    • Teach-in of current brightness value possible
    • Pulse function
    • Test function for checking detection area
    • Installation on flush-mounted socket possible (60 mm)
    • Single-handed plug-in installation
    • Instant start-up possible via factory preset
    • Controls are place protected
    • Corner angle includedSpacer and corner angle included

    194.00 €
  • Theben theLuxa P300 KNX BK 1019611

    Theben theLuxa P300 KNX BK 1019611

    • Motion detector (PIR)
    • Automatic lighting control based on presence and brightness
    • For integration into KNX building systems
    • For outdoor use
    • For installation on walls and ceilings
    • Integrated temperature sensor
    • For larger, commercial outdoors properties such as offices, public buildings, hotels, schools, car parks and warehouses
    • Easy to program with KNX ETS software
    • Adjustable brightness switching value and switch-off delay
    • Sensitivity can be reduced
    • Area limit via lens attachment
    • Mixed light measurement
    • Teach-in of current brightness value possible
    • Pulse function
    • Test function for checking detection area
    • Installation on flush-mounted socket possible (60 mm)
    • Single-handed plug-in installation
    • Instant start-up possible via factory preset
    • Controls are place protected
    • Corner angle includedSpacer and corner angle included

    194.00 €
  • Zennio EyeZen TP KNX motion detector with light sensor ZPDEZTPA-ZDPEZTPVTA

    Zennio EyeZen TP KNX motion detector with light sensor ZPDEZTPA-ZDPEZTPVTA

    ZPDEZTPA replaced by Temporary Version ZDPEZTPVTA

    The replacement of the product is due to the worldwide situation of shortage of components that we are experiencing and that has forced us to change the microcontroller with another of the same model but different capacity to ensure continuity of deliveries.

    Replacement of references in your order with devices (vT) Temporary version

    This change obliges us to compile the application program again for this microcontroller and it implies a new software register at KNX for each new reference.

    The ETS application programs for these products are different, but the functionality is maintained.

    (EyeZen_TP_vT_1.4_EIFAItR_ETS5_Cert.knxprod)

     

    KNX motion detector with brightness sensor for ceiling installation, with a 360º detection area and up to 6 metres in diameter. It includes several configurable channels for constant lighting variation, switched control of the lighting according to a brightness threshold or according to motion detection only. It is possible to adjust the sensitivity of each sensor independently and to calibrate the lighting of the work surface. Master/slave configuration allows multiple sensors to be used for large areas. Recessed installation.

    91.00 €
  • Zennio EyeZen TP KNX motion detector with light sensor ZDPEZTPW-ZDPEZTPVTW

    Zennio EyeZen TP KNX motion detector with light sensor ZDPEZTPW-ZDPEZTPVTW

    ZPDEZTPW replaced by Temporary Version ZDPEZTPVTW

    The replacement of the product is due to the worldwide situation of shortage of components that we are experiencing and that has forced us to change the microcontroller with another of the same model but different capacity to ensure continuity of deliveries.

    Replacement of references in your order with devices (vT) Temporary version


    This change obliges us to compile the application program again for this microcontroller and it implies a new software register at KNX for each new reference.

    The ETS application programs for these products are different, but the functionality is maintained.

    (EyeZen_TP_vT_1.4_EIFAItR_ETS5_Cert.knxprod)

     

    KNX motion detector with brightness sensor for ceiling installation, with a 360º detection area and up to 6 metres in diameter. It includes several configurable channels for constant lighting variation, switched control of the lighting according to a brightness threshold or according to motion detection only. It is possible to adjust the sensitivity of each sensor independently and to calibrate the lighting of the work surface. Master/slave configuration allows multiple sensors to be used for large areas. Recessed installation.

    96.00 €
  • Zennio EyeZen IN Motion detector with luminosity sensor ZPDEZINA

    Zennio EyeZen IN Motion detector with luminosity sensor ZPDEZINA

    There is no expected date for this product to be available again,

    You can choose the similar product EYEZEN TP

    This accessory must be connected to an input of a Zennio device. To find out if a device is compatible with this accessory, consult the data sheet of the device in question.

    The motion sensor with infrared detection technology is complemented by an integrated luminosity sensor, which makes the device even more useful. Directly connected to input of a Zennio device. Motion detection area can be increased by installing two sensors in parallel, to the same input. Easy installation and small size. It does not require any other type of connection or power supply.

    59.00 €
  • Zennio EyeZen IN Motion detector with luminosity sensor ZPDEZINW

    Zennio EyeZen IN Motion detector with luminosity sensor ZPDEZINW

    There is no expected date for this product to be available again,

    You can choose the similar product EYEZEN TP

    This accessory must be connected to an input of a Zennio device. To find out if a device is compatible with this accessory, consult the data sheet of the device in question.

    The motion sensor with infrared detection technology is complemented by an integrated luminosity sensor, which makes the device even more useful. Directly connected to input of a Zennio device. Motion detection area can be increased by installing two sensors in parallel, to the same input. Easy installation and small size. It does not require any other type of connection or power supply.

    59.00 €