Wago 243-112 Mounting adapter; with 4 compartments.

Depending on the number of conductors, each mounting slot can accommodate a 4- or 8-conductor MICRO PUSH WIRE® Junction Box Connector. The connectors simply snap into the mounting slots and are removable, allowing conductors to be exchanged during changeover.

Wago 243-113 Mounting adapter; with 6 compartments.

Depending on the number of conductors, each mounting slot can accommodate a 4- or 8-conductor MICRO PUSH WIRE® Junction Box Connector. The connectors simply snap into the mounting slots and are removable, allowing conductors to be exchanged during changeover.

Wago 243-212 yellow-white Connector KNX 4 holes

4-conductor modular PCB connector; PUSH WIRE®; 0.8 mm Ø; Pin spacing 5.75 mm; 2-pole; for individual solder pins; for KNX; white/yellow

Wago 243-211 dark gray/red Connector KNX 4 holes

4-conductor modular PCB connector; PUSH WIRE®; 0.8 mm Ø; Pin spacing 5.75 mm; 2-pole; for individual solder pins; for KNX; dark gray/red.

Zennio 9900022 :

Z70 USB Firmware Upgrade Cable

Schneider KNX - Cable Link flexible - MTN6941-0001 MTN6941-0002

SpaceLogic KNX Cable Link S The Cable Link connects Master/Extension or Extension/Extension which are not placed directly next to each other on the DIN rail Length-30 cm/150cm.

With "Schneider KNX - Mixed actuator 8 outputs - extension - MTN6805-0008" a connector is supplied for side-by-side installation.

If your extension is not side by side with the master or the second extension you can use this cable.

Can be installed in combination with:

Schneider KNX -  switch-blinds actuator 8 outputs - master : MTN6705-0008

Schneider KNX -  switch-blinds actuator 8 outputs - extension : MTN6805-0008

Schneider KNX - Universal Dimmer Master 2 channel : MTN6710-0102

Schneider KNX - Universal Dimmer extension 2 channel- MTN6810-0102

Thinknx Envision 7R wall mount box ENVISION7RBOX

Ext Dimensions: 195x140x56mm

Envision 7 frame ENVISION7F8_ for Thinknx Envision7_20.