JUNG-F10-KNX push-button 2-gang-Secure-CD/LS range-LSCD10721ST

Intended use
Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values, temperatures, calling up and saving light scenes, etc.
Installation in flush box with dimensions according to DIN 49073
 
Product characteristics
KNX medium: TP 256
Operating concept (rocker or button) adjustable for each operating area
Button evaluation (single-area operation or dual-area operation) adjustable
One or two functions per operating area
Integrated bus coupling unit
One status LED per operating area – red
KNX Data Secure compatible with ETS 5.7.3 or higher
Can be updated with the ETS Service App

Please note that not all covers are compatible with this pushbutton. Here is a list of compatible covers in our catalogue:

- JUNG 1-gang rocker-F10, Série LS- LS101

Soon

- JUNG 2-gang rocker-F10, Série LS- LS102

- JUNG 1-gang rocker with lens-F10, Série LS- LS101KO5

- JUNG 2-gang rocker with lens-F10, Série LS- LS102KO5

And in order to complete your knob, it is necessary to have a finishing frame. Below is the list of availability in our catalogue:

- 1-gang

- 2-gang

- 3-gang

- 4-gang

- 5-gang

JUNG Single KNX push button with LED indicator - center dot 4071.02 LED

Function: ON/OFF, roller shutters, variation
LED: always OFF/always ON/LED object, LED presentation
The LED is intended for orientation or status indication, adjustable through the
parameters.

Operating exemple :

• General OFF/ON control of the KNX lighting and one ON/OFF lighting
  or
• Control of 2 lights ON/OFF function
  or
• Control of 1 lights ON and OFF function
• Control of 2 lights ON/OFF/CLIMITER function
• Control of 1 roller shutter

The JUNG BP/BCU mechanisms are fitted with the finishing trims of the AS, A series, CD, SL and LS (SL series only button position).
Depending on the model of BP/BCU (1-way or 2-way) it is possible to use single or double button covers with or without indicator light.
Two white LEDs are intended to become orientation or status information depending on the selected parameters.
The "intermediate position" version can carry out a command by pressing the button up and down, whereas the "button position" version can only carry out a command by pressing the button down.
The BP/BCU operate with an application, i.e. they consist of a mechanism (hardware) and a program (software). With the aid of the application program it is possible to parameterize the functions and link group addresses (see JUNG database).

Please note that not all covers are compatible with this pushbutton. Here is a list of compatible covers in our catalogue:

- single cover

- single cover with indicator light

And in order to complete your knob, it is necessary to have a finishing frame. Below is the list of availability in our catalogue:

- 1-gang

KNX push button BCU - middle position -

Function: ON/OFF, roller shutters, variation
LED: always OFF/always ON/LED object, LED presentation
The LED is intended for orientation or status indication, adjustable through the
parameters.

Operating exemple :

• OFF/ON KNX General lighting control and a roller shutter
  or
• Control of 4 lights ON/OFF function
  or
• Control of 2 lights ON and OFF function
• Control of 2 lights ON/OFF/Dimmer function
• Control of 2 roller shutter

The JUNG BP/BCU mechanisms are fitted with the finishing trims of the AS, A series, CD, SL and LS (SL series only button position).
Depending on the model of BP/BCU (1-way or 2-way) it is possible to use single or double button covers with or without indicator light.
Two white LEDs are intended to become orientation or status information depending on the selected parameters.
The "intermediate position" version can carry out a command by pressing the button up and down, whereas the "button position" version can only carry out a command by pressing the button down.
The BP/BCU operate with an application, i.e. they consist of a mechanism (hardware) and a program (software). With the aid of the application program it is possible to parameterize the functions and link group addresses (see JUNG database).

Please note that not all covers are compatible with this pushbutton. Here is a list of compatible covers in our catalogue:

- dual cover

- dual cover with indicator light

And in order to complete your knob, it is necessary to have a finishing frame. Below is the list of availability in our catalogue:

- 1-gang

- 2-gang

- 3-gang

- 4-gang

- 5-gang

JUNG Glass Panel with 24 push-button sensor-IP54-KNX with status LED-MBT2424WW

Installation (IP54) in a double horizontal box (diameter 68mm), fixed by 4 screws.

Product characteristics:

- color: White

- Dimensions front plate: Width:236mm-Height:156mm-Depth:14mm

- Installation Depth: approx 39mm

- Push-button functions switching, dimming, controlling blinds, value transmitter,
calling up light scenes etc.
- High quality glass surface with 24 sensor buttons
- Operation via touching the sensor buttons
- Labelling with exchangeable labelling foil
- Status indication with 24 LEDs; the colours red, green and blue can be configured
- Acoustical feedback for touching sensor
- Fault message on dismantling
- Logic and time functions
- Integrated bus coupling unit
- Supply via separate power supply or the auxiliary voltage
output of the KNX power supply

JUNG Glass Panel with 24 push-button sensor-IP54-KNX with status LED-MBT2424SW

Installation (IP54) in a double horizontal box (diameter 68mm), fixed by 4 screws.

Product characteristics:

- Color: Black

- Dimensions front plate: Width:236mm-Height:156mm-Depth:14mm

- Installation Depth: approx 39mm

- Push-button functions switching, dimming, controlling blinds, value transmitter,
calling up light scenes etc.
- High quality glass surface with 24 sensor buttons
- Operation via touching the sensor buttons
- Labelling with exchangeable labelling foil
- Status indication with 24 LEDs; the colours red, green and blue can be configured
- Acoustical feedback for touching sensor
- Fault message on dismantling
- Logic and time functions
- Integrated bus coupling unit
- Supply via separate power supply or the auxiliary voltage
output of the KNX power supply

This device requires a customization through the zennio Touch-MyDesign tool. After ordering this product, please send us your personalization reference by email to contact@light-domotique.fr

The icons of this switch are not fully backlit: only one LED is present in the middle of the icon. 

Square TMD-Display is a capacitive room controller with 5 multifunction buttons and 1.8” backlit frame, totally customizable to cause the desired aesthetic impression in any ambience. Everyone can create unique compositions, which could include images, icons, texts or logos. This customization is printed on a high-strength tempered glass with an PC-ABS frame to finish off the author’s work. Square TMD-Display allows selecting the function for each of its buttons and indicators shown in the display. TMD also includes thermostat function, internal temperature probe and two analog/digital inputs.

Siemens KNX Room operator unit - QMX3.P34 - QMX3.P34-1BSC

Room operator unit KNX with temperature sensor, segmented backlit display, touchkeys, black

• • Functions:
    

    • Temperature sensor
    • Segmented backlit display and touchkeys

    Additional functionalities GAMMA

    • Temperature control, adjustable as PWM control and/or modulating control (PID algorithm), for pure heating mode, pure cooling mode, heating and cooling mode
    • Operating modes switchable via KNX and/or display: Comfort mode, Pre-Comfort, energy savings and protection mode
    • Adjustable commissioning and control parameters for radiated heating, slow and fast, floor heating slow and fast
    • Integrated bus coupling unit
    • 3 independently adjustable switching values for CO2 concentration and relative air humidity for air quality control
    • Actuating variable for 1, 2, or 3-stage fans (humidity and CO2)
    • Actuating variable for 1, 2, or 3-point positioning signal (humidity and CO2)
    • Setpoint for room temperature and relative humidity and CO2 concentration adjustable via KNX