switches
-
CJC - LUCIA - KNX - 4 way - CJC7204
CJC - LUCIA - KNX - 4 way - CJC7204
Delivery time 8 weeks, manufactured to order.
The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation510.00 € -
JUNG-F40-universal push-button module 2-gang-42921 ST
JUNG-F40-universal push-button module 2-gang-42921 ST
4-gang control panel-42921 ST replaces 4192 TSM, key frames and covers remain the same.
for cover kit 2-gang, ref.-no.: .. 402 TSA ..
for cover 2-gang with symbols, ref.-no.: .. 402 TSAP ..
can be extended by means of a push-button extension module, ref.-no.: 409.. TSEM
Adapter frames are included in delivery:
ref.-no. LS 4 AR for LS range (pre-mounted) and ref.-no. CD 4 AR for CD range.
AS / A ranges without adapter frame.
Only with ETS 5.7.7 or later versions or ETS6.0.6 or later versions the full functionality will be available.
ETS product family: Push-button
Product type: 2-gang push-button
1 blue LED: operation indication159.00 € -
JUNG-F40-universal push-button module 4-gang-42941 ST
JUNG-F40-universal push-button module 4-gang-42941 ST
4-gang control panel-42941 ST replaces 4194 TSM, key frames and covers remain the same.
for cover kit 4-gang, ref.-no.: .. 404 TSA ..
for cover 4-gang with symbols, ref.-no.: .. 404 TSAP ..
can be extended by means of a push-button extension module, ref.-no.: 409.. TSEM
Adapter frames are included in delivery:
ref.-no. LS 4 AR for LS range (pre-mounted) and ref.-no. CD 4 AR for CD range.
AS / A ranges without adapter frame.
Only with ETS 5.7.7 or later versions or ETS6.0.6 or later versions the full functionality will be available.
ETS product family: Push-button
Product type: 4-gang push-button
1 blue LED: operation indication187.00 € -
JUNG Single KNX push button with LED indicator - center dot 4071.02 LED
KNX push button BCU - middle position -
Function: ON/OFF, roller shutters, variation
LED: always OFF/always ON/LED object, LED presentation
The LED is intended for orientation or status indication, adjustable through the
parameters.Operating exemple :
- General OFF/ON control of the KNX lighting and one ON/OFF lighting
or - Control of 2 lights ON/OFF function
or - Control of 1 lights ON and OFF function
- Control of 2 lights ON/OFF/CLIMITER function
- Control of 1 roller shutter
The JUNG BP/BCU mechanisms are fitted with the finishing trims of the AS, A series, CD, SL and LS (SL series only button position).
Depending on the model of BP/BCU (1-way or 2-way) it is possible to use single or double button covers with or without indicator light.
Two white LEDs are intended to become orientation or status information depending on the selected parameters.
The "intermediate position" version can carry out a command by pressing the button up and down, whereas the "button position" version can only carry out a command by pressing the button down.
The BP/BCU operate with an application, i.e. they consist of a mechanism (hardware) and a program (software). With the aid of the application program it is possible to parameterize the functions and link group addresses (see JUNG database).Please note that not all covers are compatible with this pushbutton. Here is a list of compatible covers in our catalogue:
- single cover with indicator light
And in order to complete your knob, it is necessary to have a finishing frame. Below is the list of availability in our catalogue:
- 1-gang
- 2-gang
- 3-gang
- 4-gang
- 5-gang
63.00 € - General OFF/ON control of the KNX lighting and one ON/OFF lighting
-
JUNG Dual KNX push button with LED indicator - center point 4072.02 LED
KNX push button BCU - middle position -
Function: ON/OFF, roller shutters, variation
LED: always OFF/always ON/LED object, LED presentation
The LED is intended for orientation or status indication, adjustable through the
parameters.Operating exemple :
- OFF/ON KNX General lighting control and a roller shutter
or - Control of 4 lights ON/OFF function
or - Control of 2 lights ON and OFF function
- Control of 2 lights ON/OFF/Dimmer function
- Control of 2 roller shutter
The JUNG BP/BCU mechanisms are fitted with the finishing trims of the AS, A series, CD, SL and LS (SL series only button position).
Depending on the model of BP/BCU (1-way or 2-way) it is possible to use single or double button covers with or without indicator light.
Two white LEDs are intended to become orientation or status information depending on the selected parameters.
The "intermediate position" version can carry out a command by pressing the button up and down, whereas the "button position" version can only carry out a command by pressing the button down.
The BP/BCU operate with an application, i.e. they consist of a mechanism (hardware) and a program (software). With the aid of the application program it is possible to parameterize the functions and link group addresses (see JUNG database).Please note that not all covers are compatible with this pushbutton. Here is a list of compatible covers in our catalogue:
- dual cover with indicator light
And in order to complete your knob, it is necessary to have a finishing frame. Below is the list of availability in our catalogue:
- 1-gang
- 2-gang
- 3-gang
- 4-gang
- 5-gang
73.00 € - OFF/ON KNX General lighting control and a roller shutter
-
Interra black Just Touch ITR328-1001
Interra Just Touch ITR328-1001 :
• Pushbutton has Switching, toggle, dimming, shutter/blinds, thermostat controls, scenes, value, 2 channels, step switching mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heating and Cooling modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC), CO2 concentration (from bus), humidity percentage, operating modes, fan levels, on/off indicators, warnings and locking status are displayed on screen.
• Fan controller available with different speed indicators.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature, humidity and air quality levels.
• RGB LED control.380.00 € -
Interra white Just Touch ITR328-1002
Interra Just Touch ITR328-1002 :
• Pushbutton has Switching, toggle, dimming, shutter/blinds, thermostat controls, scenes, value, 2 channels, step switching mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heating and Cooling modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC), CO2 concentration (from bus), humidity percentage, operating modes, fan levels, on/off indicators, warnings and locking status are displayed on screen.
• Fan controller available with different speed indicators.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature, humidity and air quality levels.
• RGB LED control.380.00 € -
Trivum - touch screen TouchPad 7 - 600013
Touch screen - TouchPad 7"
This 7-inch flush-mounted touchpad offers multiple applications, its main function being to provide a fluid, fast, and intuitive audio control platform.
The touchpad controls an audio amplifier, providing an extremely fast response time.
The touch screen has additional functions such as the management of lighting, roller shutters, heating and air conditioning.
It can also display information such as ip camera images (in standard jpeg format), indoor temperatures and outdoor temperatures (with additional sensor).
Other information such as weather conditions can also be displayed thanks to communication to the outside via the internet.An installation box is required:In-wall box-500016
Additional included functions :
- Lighting:
it allows to have a control of switching, and/or dimming, it also allows to control RGB LEDs and to create scenarios. - Roller shutters:
these are directly controllable via the touchpad. - Temperature: whether for heating or air conditioning, the temperature is controlled in comfort, eco, reduced or frost-free mode. Possibility to vary the set temperature.
- Camera:
Allows a visualization directly on the screen and even a control of the camera, which is motorized (if the model is compatible).
It is possible to communicate with the touchpad thanks to its integrated web server. This allows you to control your touchpad from a connection to your computer or your smartphone.
It can also communicate with KNX products (Thanks to a KNX IP router available in the catalog).
The 7" trivum TouchPad is designed for flush mounting. It must be connected via a CAT5 network cable to a standard POE (Power Over Ethernet) switch: the switch also provides the power supply.
890.00 € - Lighting: