Temperature management
-
Zennio IRSC A/C Unit control device ZN1CL-IRSC
Zennio IRSC A/C Unit control device ZN1CL-IRSC
A/C unit control module. IRSC is a KNX infrared air conditioner controller able to manage more than 300 A/C unit models from different manufacturers. IR transmitter included.
172.00 € -
Zennio MINiBOX 0-10V X1 Multifunction actuator with 1 0-10 V input/output analog channel ZIO1X010
Zennio MINiBOX 0-10V X1 Multifunction actuator with 1 0-10 V input/output analog channel ZIO1X010
DIN rail mounting actuator (2 DIN wide) with 1 channel configurable as 0-10 V output, 0-10 V input or 4-20 mA input. It includes fan coil module for installations where either the valve or the fan are 0-10 V signal controlled and the remaining are controlled by an external device.
Manual control is available using the push button and the channel’s status is shown via the LED indicator.
It includes 10 logic functions and 1 thermostat.
132.00 € -
Zennio MINiBOX 0-10V X2 Multifunction actuator with 2 0-10 V input/output analog channels ZIO2X010
Zennio MINiBOX 0-10V X2 Multifunction actuator with 2 0-10 V input/output analog channels ZIO2X010
DIN rail mounting actuator (2 DIN wide) with 2 channels configurable as 0-10 V outputs, 0-10 V inputs or 4-20 mA inputs. Each channel can be configured individually or jointly to control a 2-pipe fan coil where both fan and valve are controlled with 0-10 V signals.
Manual control is available using the push buttons and each channel’s status is shown via the LED indicator
It includes 10 logic functions and 2 thermostats
149.40 € -
Schneider Thermoelectric valve drive, 230 V- MTN639125
Schneider Thermoelectric valve drive, 230 V- MTN639125
Suitable for use with Valve Drive Controller.
The 230 V thermoelectric valve drive is used to open
and shut valves in heating, ventilation and air
conditioning technology. It is controlled by a room
temperature control unit (230 V) with a two-step
output or pulse width modulation.
A large selection of valve adapters ensures that it
conforms perfectly to a range of valve bodies and
heating circuit distributors. The 230 V thermoelectric
valve drive therefore has universal applicability and is
suitable for a diverse range of systems.46.80 € -
Schneider-KNX-Valve Drive Controller-MTN6730-0002
Schneider-KNX-Valve Drive Controller-MTN6730-0002
It is used to operate thermal servo-motors designed to control
control of hydraulic floor heating or cooling ceilings.
The actuator has 6 electronic outputs. Up to
connect up to 4 230 Vac thermal actuators or 2 24 Vac thermal
24 Vac thermal actuators to each output. Actuators
normally closed or normally open actuators can be
connected.
In addition, the actuator has 6 integrated temperature regulators
which operate independently of each other.
The correction variables of the controller outputs can be
connected internally to the actuator outputs, so that temperature
so that temperature control and servomotor actuation can be performed
can be carried out by a single device on the bus.
The integrated temperature controllers can send the
correction variable telegram on the bus and thus control other
control other heating or fan coil actuators.
The outputs are either switched (1 bit) or PWM (1
byte).
Each output is protected against overload and short-circuit.
All outputs can be controlled manually using
front panel pushbutton.
Panel mounting on rails.
The bus is connected via a bus terminal.283.20 €