Airzone-Aidoo KNX v2.0 Mitsubishi Heavy  KNX Controller-AZAI6KNX2MHI

Device to manage and integrate Mitsubishi Heavy units in KNX TP-1 control systems. Externally powered by the indoor unit.

Features:

• • Control of the parameters of the unit.
  • KNX Control.
  • KNX standard data.
  • 3 digital configurable inputs.
  • Easily configurable from ETS.
  • Communication errors detection.
  • Allows power supply through the KNX bus during configuration with a consumption of 1.4 W.

Airzone-KNX-Airzone integration gateway X6 - AZAI6KNXDA0

Airzone integration gateway of HVAC Airzone systems in KNX TP-1 control systems through ModBus. Bus KNX power supply. DIN-rail mounting.

Functionalities:

• One Airzone system per KNX gateway.
• Full KNX.
• KNX standard data.
• Easily configurable from ETS.
• Zone control through KNX devices.
• Up to 8 zones available for centralized systems and up to 14 for distributed systems.
• Type of installation control.
• Communication errors detection.

ISE - Set SMART CONNECT KNX Vaillant S-0001-006

The SMART CONNECT KNX Vaillant is simply connected to the eBUS of your KNX installation. Use the ETS to make configurations, carry out set up and Bob's your uncle.

Intelligent heating control via KNX: Together with the system controllers sensoCOMFORT or multiMATIC, the SMART
CONNECT KNX Vaillant offers integration between the Vaillant system and KNX.
Features:
• Control of operation mode and temperature setpoint values for up to three heating zones
• Control of operation mode and temperature setpoint value for hot water supply
• Control of ventilation system operation mode
• System information like service mode, error messages, date and time, outside temperature and system status
• Heating circuit status values: Pump status, flow setpoint temperature, flow temperature, minimum flow setpoint
temperature for cooling mode, heating curve for each heating circuit
• Hot water status values: Circulation pump status, charging pump/3-way valve status, hot water temperature
• Display of temperature and error status for up to eight heat generators
• Yield values of solar systems and heatpumps
• Consumption values for hot water supply and heating (electricity and gas)
• Handover protocol from installer to system integrator
• Simple integration into KNX (can be completely configured via ETS)
• Easy-to-understand structure in the ETS5 thanks to channels
• Extensions via firmware updates

Zennio KLIC-MITTv3  Mitsubishi Air conditionner controller ZCLMITTV3

KNX-Mitsubishi Electric Gateway (IT connector)

Zennio gateway to control Mitsubishi Electric air conditioning units through IT terminal connector from KNX system in a bidirectional way. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry contact binary inputs (switches, sensors or push buttons) and 10 logical functions.

Zennio KLIC-MITTE Mitsubishi Electric KNX Ecodan Gateway (IT connector) ZCLMITTE

Zennio gateway to control Mitsubishi Ecodan hydroboxes through IT terminal connector from KNX system in a bidirectional way. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry contact binary inputs (switches, sensors or push buttons) and 10 logical functions.

Zennio KLIC-DI v2 Daikin KNX air conditioner controller (Industrial Range) ZCLDIV2

Zennio gateway to control Daikin commercial and industrial air-conditioning units from KNX system in a bidirectional way. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry contact binary inputs (switches, sensors or push buttons) and 10 logical functions. 2 DIN rail units. Accessories: temperature probe and motion sensor.

Zennio KLIC-DAv2 KNX-Daikin Altherma gateway ZCLDAV2

• Zennio gateway to control Daikin Altherma/Altherma 3 units from KNX system in a bidirectional way (see KLIC-DA’s Compatibility table). It includes 2 analog-digital inputs for temperature probes, motion sensor or dry contact binary inputs (switches, sensors or push buttons) and 10 logical functions. 2 DIN rail units. Accessories: temperature probe and motion sensor.

Zennio KLIC-SG-Samsung-KNX gateway-ZCLSG (VRF and Industrial range)

Zennio gateway to control Samsung VRF and Industrial air conditioning units from KNX system in a bidirectional way. It includes 2 analog-digital inputs for temperature probes, motion sensor or dry contact binary inputs (switches, sensors or push buttons) and 10 logical functions. 2 DIN rail units.