Zennio FANinBOX 110V 1CH Ceiling fan controller for fan units ZCLFB110C1

ceiling fan controller for fan units powered at 110 VAC

Ceiling fan controller for fan units powered at 110 VAC (2 DIN-rail units). It allows the control of up to 4 fan speeds and manual control of outputs with status LED indicators. It includes a module with 10 logical functions and error indicator of power failure.

Zennio ZoningBOX 4 Zoning Air-Conditioning actuator for up to 4 zones ZCL-ZB4

Actuator for DIN-rail (4.5 units) for air conditioning climate systems with zoning. It controls motorized 12/24 VDC grilles in up to 4 zones (up to 2 grilles per zone). Temperature management in up to 12 zones with additional ZoningBOX 4/6 modules to activate the additional zones. Management of settings for the air conditioning climate systems (up to two units): on/off, setpoint, mode, fan speed, according to the zones enabled. Manual control of outputs and LED indicators of movement of the grilles.

Zennio ZoningBOX 6 Zoning Air-Conditioning actuator for up to 6 zones ZCL-ZB6

Actuator for DIN-rail (4.5 units) for air conditioning climate systems with zoning. It controls motorized 12/24 VDC grilles in up to 6 zones (up to 2 grilles per zone). Temperature management in up to 12 zones with additional ZoningBOX 4/6 modules to activate the additional zones. Management of settings for the air conditioning climate systems (up to two units): on/off, setpoint, mode, fan speed, according to the zones enabled. Manual control of outputs and LED indicators of movement of the grilles.

Zennio HeatingBOX 230V 4X v2 Heating actuator ZCL4H230V2

Actuator for climate systems based on water pipes which allows the control of up to 4 outputs for on/off valves operated at 230 VAC by means of triacs with short-circuit protection. It includes one independent thermostat for each output, 4 analogue-digital inputs and a module with 10 logical functions. It has a sole power input for all the outputs, as well as a common neutral for an easier installation of the valves. It allows manual control of the outputs with status indication through LEDs.

Zennio HeatingBOX 230V 8X v2 Heating actuator ZCL8H230V2

Actuator for climate systems based on water pipes which allows the control of up to 8 outputs for on/off valves operated at 230 VAC by means of triacs with short-circuit protection. It includes independent thermostat for each output, 8 analogue-digital inputs and a module with 10 logical functions. It has a sole power input for all the outputs, as well as a common neutral for an easier installation of the valves. It allows manual control of the outputs with status indication through LEDs.

Zennio HeatingBOX 24V 4X Heating actuator ZCL-4HT24

Actuator for climate systems based on water pipes which allows the control of up to 4 outputs for on/off valves operated at 24 VAC/DC by means of mosfets with protection against overload/short-circuit. It includes one independent thermostat for each output, furthermore a module with 10 logical functions. It allows manual control of the outputs with status indication through LEDs.

Zennio HeatingBOX 24V 8X Heating actuator ZCL-8HT24

Actuator for climate systems based on water pipes which allows the control of up to 8 outputs for on/off valves operated at 24 VAC/DC by means of mosfets with protection against overload/short-circuit. It includes one independent thermostat for each output, furthermore a module with 10 logical functions. It allows manual control of the outputs with status indication through LEDs.

Zennio MAXinBOX FC 0-10V FAN-COIL Controller ZCL-FC010F

MAXinBOX FC 0-10V FAN : 

Controller for up to two 2-pipes or 4-pipes fan coil units with on/off valves and 0-10 V fan speed control signal. Mounted on DIN-rails (4.5 units). 4 multifunction outputs (16 A C-Load) that can be used for the control of the fan coil on/off valves or any other purpose. 4 analog-digital multifunction inputs that can be configured as binary inputs for sensors and potential-free push buttons, as temperature probe inputs or as motion sensor inputs. It also includes 2 thermostats and 10 logical functions. Manual control of outputs and status indication through LEDs. Accessories: temperature probe and motion sensor.