JUNG 1280mA KNX power supply 21280REG

Rail mounting device, 6 rail units
ETS product family: System components
Product type: Power supply

Intended use

• Supplying KNX devices with bus voltage
• Supplying devices with DC voltage
• Mounting on DIN rail according to EN 60715 in distribution box

 
Product characteristics

• Output with integrated choke for supplying KNX bus lines
• Output DC 30 V for supplying additional devices
• Nominal current can be subdivided to outputs as desired
• Reset button
• Short-circuit proof
• Overvoltage proof
• No-load protection
• Suitable for operation in systems with emergency power supply
• Floating signal contact for operating and diagnostic message

Schneider Power supply KNX -1280 mA - MTN6513-1201

SpaceLogic KNX Power Supply 1280 mA The SpaceLogic KNX power supply generates the bus voltage for the KNX line The power supply has two outputs – one KNX output with integrated choke and one DC 30 V output for additional devices The power supply has a floating signalling contact for operation and diagnostic message

Interra 640mA KNX power supply ITR900-0164

Interra 640 mA KNX Power Supplies generate and monitor bus voltage (SELV) for the KNX devices connected to the bus. They have 640 mA busloads with an integrated choke and wide-range mains input for worldwide usage. The bus line is decoupled from the power supply by an integrated choke. The voltage output is short-circuited and overload protected. The two-color LED indicates (Green and Red) device output status. It has a wide range of input from 85…265 V AC, to 50/60 Hz.

JUNG KNX power supply, 640 mA 20640REG

rail mounting device, 4 rail units
ETS product family: System components
Product type: Power supply

Intended use

• Supplying KNX devices with bus voltage
• Supplying devices with DC voltage
• Mounting on DIN rail according to EN 60715 in distribution box

Schneider Power supply KNX -640 mA - MTN6513-1202

SpaceLogic KNX Power Supply 640 mA The SpaceLogic KNX power supply generates the bus voltage for the KNX line The power supply has two outputs – one KNX output with integrated choke and one DC 30 V output for additional devices The power supply has a floating signalling contact for operation and diagnostic message

Siemens KNX Power supply unit DC 29 V, 640 mA - 5WG1125-1AB22

KNX Power supply unit DC 29 V, 640 mA with additional unchoked output, N 125/22

Output current 640 mA

Zennio 640mA KNX power KUPSupply  ZPSU640

KNX Universal System Power Supply with additional 29 V DC output. Maximum current 640 mA. 110-240 V ~ 50/60 Hz input voltage. Installation in DIN-rail (4.5 units).

Interra 320mA KNX power supply  ITR900-132 :

• Mounting Location: Installation only on a 35 mm DIN rail of a distribution board.
• Device needs at least 4 standard modules width at installation.
• Power supply has an additional 30 VDC short circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke).
• The voltage output is overload, short circuit and over temperature protected.
• Output without choke can be used as a constant 30 VDC supply and output with choke can be used as a KNX Bus supply.