Multifunction and shutter actuators

Zennio MAXinBOX SHUTTER 4CH v3 - Shutter actuator 4 channels ZIOMBSH4V3

Shutter actuator for DIN-rail (4.5 units) It includes a module with 20 logical functions and allows manual control of the outputs with status indication through LEDs. Accessories: AC/DC shutter adapters.

185.40 €

Zennio MAXinBOX SHUTTER 8CH v3 - Shutter actuator 8 channels ZIOMBSH8V3

Shutter actuator for DIN-rail (8 units) It includes a module with 20 logical functions and allows manual control of the outputs with status indication through LEDs. Accessories: AC/DC shutter adapters.

290.40 €

Zennio ShutterBOX Drive 8CH- 8-Channel Shutter Actuator - ZIOSHD8

8-Channel Shutter Actuator with automatic travel time measurement and KNX Secure.

8-channel shutter actuator for DIN rail (8 units), which allows automatic travel times measurement through current detection.
It includes 6 alarms per channel, a module of 20 logic functions and allows manual control of the outputs with LED status indication. Among its complete functionality, the event-driven automatic control stands out, calculating the position of the sun at each moment to be able to adjust the position of the shutter and the slats.
It is compatible with KNX Secure.

334.20 €

Zennio ShutterBOX Drive 6CH- 6-Channel Shutter Actuator - ZIOSHD6

6-Channel Shutter Actuator with automatic travel time measurement and KNX Secure.

6-channel shutter actuator for DIN rail (6 units), which allows automatic travel times measurement through current detection.
It includes 6 alarms per channel, a module of 20 logic functions and allows manual control of the outputs with LED status indication. Among its complete functionality, the event-driven automatic control stands out, calculating the position of the sun at each moment to be able to adjust the position of the shutter and the slats.
It is compatible with KNX Secure.

280.20 €

Zennio ShutterBOX Drive 4CH- 4-Channel Shutter Actuator - ZIOSHD4

4-Channel Shutter Actuator with automatic travel time measurement and KNX Secure.

4-channel shutter actuator for DIN rail (4 units), which allows automatic travel times measurement through current detection.
It includes 6 alarms per channel, a module of 20 logic functions and allows manual control of the outputs with LED status indication. Among its complete functionality, the event-driven automatic control stands out, calculating the position of the sun at each moment to be able to adjust the position of the shutter and the slats.
It is compatible with KNX Secure.

212.40 €

Zennio ShutterBOX Drive 2CH- 2-Channel Shutter Actuator - ZIOSHD2

2-Channel Shutter Actuator with automatic travel time measurement and KNX Secure.

2-channel shutter actuator for DIN rail (2 units), which allows automatic travel times measurement through current detection.
It includes 6 alarms per channel, a module of 20 logic functions and allows manual control of the outputs with LED status indication. Among its complete functionality, the event-driven automatic control stands out, calculating the position of the sun at each moment to be able to adjust the position of the shutter and the slats.
It is compatible with KNX Secure.

149.40 €

Elsner KNX Control Module for Door Drives KNX A3-B2

Elsner Module de commande d’entraînement de porte KNX A3-B2

Module de commande d'entraînement de porte KNX avec 3 sorties et 2 entrées binaires

198.00 €

Ekinex - Universal interface 4 Input - 2 Output (5A) EK-CE2-TP

Ekinex - Universal interface 4 Input - 2 Output (5A) EK-CE2-TP

Description

The Ekinex® universal interface EK-CE2-TP is a KNX device which can be used as input and/or output module. The device is equipped with:

4 inputs to connect the KNX bus to switches, pushbuttons or classic sensors (normally not communicating on the KNX bus) or any binary signals from other devices, in order to control KNX bus functions. In addition, one input is configurable as analog to connect a NTC temperature sensor (10 kΩ a 25 °C);
2 5A relay outputs to be used as electrical load control (independent) or paired for shutter and blind actuator control.

The voltage for polling the inputs is supplied within the device. The device integrates a KNX bus communication module and is realized for flush-mounting or for mounting on a standard 35 mm DIN-rail. The device is powered by the KNX bus and does not require auxiliary power supply.

Power supply

30 Vdc power supply by KNX bus
Current consumption from bus < 10 mA

219.60 €