Multifunction and shutter actuators

Siemens KNX Switching actuator 12 x AC 230 V, 10 A - 5WG1532-1DB61

Siemens KNX Switching actuator 12 x AC 230 V, 10 A - 5WG1532-1DB61

KNX Switching actuator 12 x AC 230 V, 10 AX, C-Load

N 532D61KNX Switching actuator 12 x AC 230 V, 10 AX, C-Load
Rated contact current according to DIN EN 60669: 10 AX (140 µF fluorescent lamp load), 10 A (resistive load)
Additional functionalities GAMMA
Per output

Selectable operating mode (normal mode, time switch mode, flashing mode)

Selectable relay mode (NC/NO)

Variable On and Off delay times

Two selectable logic operations (AND, OR, NAND, NOR, XOR, FILTER, TRIGGER)

Selectable sending of status objects on request, cyclically and/or automatically after a change

Selectable switching state on bus voltage failure

Selectable start value of the switching object on bus voltage recovery

Optional addition of a night mode object for time-limited switching On of the output, i.e. the illumination, at night

Variable On period at night or time switch mode

Selectable addition of an object to change the On period at night or time switch mode

Selectable post-triggering (1x, 2x, 3x, 4x, 5x) of the On period in time switch mode

Selectable warning signal prior to imminent switching-off by brief off and on switching (flashing) at night or in time switch mode and/or via an optional warning object

Per output selectable functions:

For manual override ON

For permanent OFF switching

Blocking of the output

For switching on or off in forced mode

Counting of operating hours and threshold monitoring

Counting of load cycles and threshold monitoring

Integrated 8-bit scene control with up to 8 scenes per output

Construction site function switching

Object for monitoring of device function

Object for targeted retrieval of status values

362.40 €

Zennio MAXinBOX 16 V4 - ZIOMB16V4

KNX multifunction actuator with KNX Secure - 16 outputs 16 A

Multifunction actuator for DIN rail (8 units) with 16 outputs (16 A C-Load) which offer multiple configuration as shutter channels, as individual outputs or as blocks of 2-pipes fan coil controller. It allows manual control of its outputs through the push buttons on the cover. It includes 20 independent logical functions. It is compatible with KNX Secure. Accessories: AC/DC shutter adapters.

370.80 €

JUNG KNX switch actuator 16-gang KNX blinds actuator 8-gang 230161SR

Jung 230161SR

Rail mounting device, 8 rail units
with manual electronic operation and LED status indication
Project design and commissioning with ETS5 or a more recent version.
ETS product family: Output
Product type: Binary output

Intended use

Switching of electrical loads with floating contacts
Switching of electrically-driven blinds, shutters, awnings and similar hangings
Mounting on DIN rail according to EN 60715 in distribution boxes

Product characteristics

Outputs can be operated manually, construction site mode
Feedback in manual mode and in bus mode
Disabling of individual outputs manually or via bus
Central functions
Cyclical monitoring
Can be updated with the ETS Service App

Characteristics switching operation

Operation as NO or NC contacts
Feedback function
Logic operation and forcing function
Central switching function with collective feedback
Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function
Scene function
Operating hours counter

Characteristics blinds operation

Suitable for 230 V AC motors
Operation modes ‘Blind with slats’, ‘Shutter/awning’, ‘Ventilation flap/skylight’
Blind/shutter position directly controllable
Slat position directly controllable
Feedback of movement status, blind/shutter position and slat position
Cyclical feedback during movement
Forced position through higher-level controller
Safety function: rain alarm, frost alarm, 3 independent wind alarms
Sun protection function with auto Heating/Cooling
Scene function

The total current of two adjacent outputs must not exceed 20 A.

305.40 €

Zennio MAXinBOX 20 ZIOMB20

Zennio MAXinBOX 20 ZIOMB20

KNX Multifunction actuator with KNX Secure - 20 outputs 16 A

Multifunction actuator for DIN-rail (10 units) that offers multiple configurations of up to 10 shutter channels, up to 20 independent outputs of 16 A (capacitive loads supported) and up to 5 blocks of 2-pipes fan coil controller. It allows manual control of its outputs thanks to the push buttons on the cover. LED indicators can show the status of its outputs. It includes 30 independent logical functions to enlarge the versatility of the automations in KNX system. It is compatible with KNX Secure. Accessories: AC/DC shutter adapters.

435.00 €

JUNG KNX switch actuator 24-gang KNX blinds actuator 12-gang 230241SR

JUNG KNX switch actuator 24-gang KNX blinds actuator 12-gang 230241SR

rail mounting device, 12 rail units
with manual electronic operation and LED status indication
Project design and commissioning with ETS5 or a more recent version
ETS product family: Output
Product type: Binary output mix

Intended use

Switching of electrical loads with floating contacts
Switching of electrically-driven blinds, shutters, awnings and similar hangings
Mounting on DIN rail according to EN 60715 in distribution box

415.20 €

Zennio MAXinBOX 24 v2 -24 outputs KNX actuator ZIOMB24V2

Multifunction actuator for DIN-rail (12 units) that offers multiple configurations of up to 12 shutter channels, up to 24 independent outputs of 16 A (capacitive loads supported) and up to 6 blocks of 2-pipes fan coil controller. It allows manual control of its outputs thanks to the push buttons on the cover. LED indicators can show the status of its outputs. It includes 30 independent logical functions to enlarge the versatility of the automations in KNX system. Accessories: AC/DC shutter adapters.

485.40 €