Zennio LUMENTO x4 ZN1DI-RGBX4

Main characteristics:

• programmable product with ETS5
• LED control (24 volts) RGB/White on 4 independent channels.
• Requires an external 24VDC, 10A power supply. Possibility to supply 12VDC in specific cases.
• Possibility of dimming, switching on with intensity and preset color.
• ON/OFF function. LED test function.
• Integrated KNX bus coupling unit (BCU).
• KNX and CE marked.

Safety instructions and warnings :

• Do not connect the main voltage (230V) or other external voltages to the KNX Data Bus. Connecting an external voltage may endanger the electrical safety of the entire KNX system.
• Always check during installation that there is sufficient insulation between the 230V main voltage conductors and the conductors of the bus and its extensions.
• If the overheating protection trips, the device will reduce the illumination level (50%) and the control frequency. For more information, see the manual.The voltage of the power source connected to the Lumento must never exceed the supply voltage specified by the manufacturer of the load to be tested, as this may damage the load.

Zennio LUMENTO x3 ZN1DI-RGBX3

Main characteristics:

• programmable product with ETS5
• LED control (24 volts) RGB/White on 3 independent channels.
• Requires an external 24VDC, 10A power supply. Possibility to supply 12VDC in specific cases.
• Possibility of dimming, switching on with intensity and preset color.
• ON/OFF function. LED test function.
• Integrated KNX bus coupling unit (BCU).
• KNX and CE marked.

Safety instructions and warnings :

• Do not connect the main voltage (230V) or other external voltages to the KNX Data Bus. Connecting an external voltage may endanger the electrical safety of the entire KNX system.
• Always check during installation that there is sufficient insulation between the 230V main voltage conductors and the conductors of the bus and its extensions.
• If the overheating protection trips, the device will reduce the illumination level (50%) and the control frequency. For more information, see the manual.The voltage of the power source connected to the Lumento must never exceed the supply voltage specified by the manufacturer of the load to be tested, as this may damage the load.

Zennio Lumento DX4 v2 - ZDILDX4V2

LED dimmer with 4 channels designed for LED technology, featuring constant voltage regulation and DIN-rail mounting (4.5 units).
The dimming channels can be configured as combinable independent channels, an RGBW channel, RGB+W channels, and combinable TW channels. Additionally, it includes a relay output (16 A) to control the LED power supply or for independent use, as well as manual test buttons to check the functioning of the channels.
Among its comprehensive functionality, the Color Temperature control and the HCL control (Human Centric Lighting) stand out. It also incorporates the Logical Functions module. It is compatible with KNX Secure.
Maximum current per channel: 10 A. Maximum current per device: 24 A. Power supply: 12-40 VDC.

Jung KNX LED controller 5 Ways - 390051SLEDR

rail mounting device, 4 rail units
with manual electronic operation and LED status indication
Project design and commissioning with ETS5 or a more recent version
ETS product family: Illumination
Product type: Dimmer

Intended use
Dimmer for controlling LEDs, LED modules, LED spots, halogen lamps and incandescent lamps with 5 V ... 48 V (pulse width-modulated PWM)
Mounting on DIN rail according to EN 60715 in distribution box
 
Product characteristics
Dimmer for colour temperature and coloured light control (RGB/HSV)
Different dimming characteristics settable (soft dimming, deep-down dimming)
PWM frequency settable (211 ... 1200 Hz)
Commissioning with display support
Free configuration of the channels
Integrated scenes and bit scenes
Predefined and freely-definable sequences
Time-controller dimming or Human Centric Lighting (HCL)
Staircase lighting function
Disabling function
Measurement and meter function
Diagnosis/indication of protection function via KNX group addresses and on display
Electronic over-temperature protection
Protection function for LED modules and power supply
KNX Data Secure compatible with ETS 5.7.3 or higher