Skip to content

Input module


  • Interra 2 channels Universal interface ITR102

    Interra ITR102 :

    Description : 

    ITR102 device is used to interface the contacts to KNX bus substructure such as push buttons, switches etc. to make them communicating devices.

    Configuration and features : 

    • The complete configuration of the device is performed via ETS3 or higher.
    • Depending on ETS configuration and settings the product feature will be different.
    • Avaialble functions are:
      • Switching
      • Dimming
      • Toggle
      • Blind Control
      • 2 Channel
      • Value Selected
    • Most of functions only need one input and therefore each input might be assigned a different function. However there are also some functions which use two inputs such as “Dimming with 2 buttons” and “Shutter/Blinds with 2 buttons”.

    Mounting, commissionning and safety notes : 

    • The device may only be installed and put into operation by a qualified electrician or authorized personnel.
    • The device is inserted in a flush-mounted combined joint box.
    • The installation location should not be in the outdoor area.
    • The voltage potentials on the lines connecting the contacts are not electrically isolated from the bus voltage.
    • Permitted cable length can be up to 5 meters and unused wires should be insulated.
    • Avoid contact with liquids and corrosive gases.
    • Do not get wrong connection for KNX Black and Red wires.
    • Please do not forget to recheck all connections after installation

    44.50 €
  • Interra 4 channels Universal interface ITR104

    Interra ITR104 :

    Description : 

    ITR104 device is used to interface the contacts to KNX bus substructure such as push buttons, switches etc. to make them communicating devices.

    Configuration and features : 

    • The complete configuration of the device is performed via ETS3 or higher.
    • Depending on ETS configuration and settings the product feature will be different.
    • Avaialble functions are:
      • Switching
      • Dimming
      • Toggle
      • Blind Control
      • 2 Channel
      • Value Selected
    • Most of functions only need one input and therefore each input might be assigned a different function. However there are also some functions which use two inputs such as “Dimming with 2 buttons” and “Shutter/Blinds with 2 buttons”.

    Mounting, commissionning and safety notes : 

    • The device may only be installed and put into operation by a qualified electrician or authorized personnel.
    • The device is inserted in a flush-mounted combined joint box.
    • The installation location should not be in the outdoor area.
    • The voltage potentials on the lines connecting the contacts are not electrically isolated from the bus voltage.
    • Permitted cable length can be up to 5 meters and unused wires should be insulated.
    • Avoid contact with liquids and corrosive gases.
    • Do not get wrong connection for KNX Black and Red wires.
    • Please do not forget to recheck all connections after installation

    53.50 €
  • Interra 6 channels Universal interface ITR106

    Interra ITR106 :

    Description : 

    ITR106 device is used to interface the contacts to KNX bus substructure such as push buttons, switches etc. to make them communicating devices.

    Configuration and features : 

    • The complete configuration of the device is performed via ETS3 or higher.
    • Depending on ETS configuration and settings the product feature will be different.
    • Avaialble functions are:
      • Switching
      • Dimming
      • Toggle
      • Blind Control
      • 2 Channel
      • Value Selected
    • Most of functions only need one input and therefore each input might be assigned a different function. However there are also some functions which use two inputs such as “Dimming with 2 buttons” and “Shutter/Blinds with 2 buttons”.

    Mounting, commissionning and safety notes : 

    • The device may only be installed and put into operation by a qualified electrician or authorized personnel.
    • The device is inserted in a flush-mounted combined joint box.
    • The installation location should not be in the outdoor area.
    • The voltage potentials on the lines connecting the contacts are not electrically isolated from the bus voltage.
    • Permitted cable length can be up to 5 meters and unused wires should be insulated.
    • Avoid contact with liquids and corrosive gases.
    • Do not get wrong connection for KNX Black and Red wires.
    • Please do not forget to recheck all connections after installation

    64.00 €
  • Zennio Quad Plus - Input module with 4 analog-digital inputs - ZIO-QUADP

    Zennio Quad Plus - Input module with 4 analog-digital inputs - ZIO-RQUAD8

    Analog/digital sensor. QUAD Plus is an analog/digital sensor that offers a large variety of functionality. Its 4 optocoupled multi-function inputs may be configured as digital inputs for sensors and potential-free push buttons, as temperature probes or as a motion sensor. Four room thermostats for heating/cooling control systems included. Accessories: Temperature probes and motion sensor.

    101.00 €