JUNG 1520F socket with charger USB type A and type C

2-pole + male earth pin, 16 A / 250 V ~
CEE 7/5
with enhanced contact protection / shutter (Safety Plus)
with 1 USB port type A and 1 USB port type C
with screwless terminals for rigid and untreated flexible wires up to 2.5 mm²

Installation in flush box depth (inner dimension): min. 57 mm

KNX universal LED dimmer actuator, 2 outputs

 2 x 300W outputs for incandescent lamps 230 V or 4 x 7 to 50 W outputs for 230 V LED lamps 
ETS product family: Lighting
Type: Dimmer

Intended use

Switching and variation:

• incandescent lamps
• HV halogen lamps
• Tronic transformers with halogen lamps
• variable inductive transformers with halogen or LED lamps
• HT LED lamps
• compact fluorescent lamps
• Mounting on DIN rail in a sub-distributor according to EN 60715

Product features

• Automatic or manual selection of the variation principle adapted to the load
• Secure against no-load operation, short circuits and overheating
• Short circuit message
• Manually controllable outputs
• Return of the switching state and the change value
• Parameterizable variation and activation
• Timer functions: switch-on delay, switch-off delay, staircase light switch and warning function Light scene operation
• Locking of individual outputs manually or by bus
• LED status display of the outputs
• Operating hours counter
• A power failure longer than approx. 5 seconds will deactivate the dimming actuator. Depending on the parameter setting, the connected load is measured again after the mains voltage is restored.

JUNG 2-gang Blind - shutter rocker - LS995P

This cover is compatible with the following mechanisms and frames:

JUNG 2-gang blind-shutter switch Mechanism 230 V 509VU

-JUNG - 1 gang frame - LS990

-JUNG - 2 gang frame - LS990

-JUNG - 3 gang frame - LS990

-JUNG Cadre 4 postes LS990

-JUNG Cadre 5 postes LS990

Available colors :

• Ivory
• Black
• Light grey
• White
• Titanium
• Dark
• Aluminium
• matt black
• matt white

JUNG 2-gang blind-shutter switch  Mechanism 230 V  509VU

To complete your button, you need a  2-gang Blind - shutter rocker - LS995P  and a finishing frame. Below is the list of availability in our catalogue :

- simple

- duplicate

- triple

- fourfold

- fivefold

JUNG 2-gang push-button  230V 539U

To complete your button, you need a simple cover and a finishing frame. Below is the list of availability in our catalogue :

- simple

- duplicate

- triple

- quadruple

- quintuple

JUNG 2-gang rocker -995

This cover is compatible with the following mechanisms and frames:

JUNG Double Push Button Mechanism with 2 Closing Contacts 230V 531-2USI

-JUNG Toggle mechanism 230V 506U

-JUNG Push button mechanism one NO contact 230V 531U

-JUNG Single Push Button Bipolar Closing Mechanism 532U

-JUNG - 1 gang frame - LS990

-JUNG - 2 gang frame - LS990

-JUNG - 3 gang frame - LS990

-JUNG Cadre 4 postes LS990

-JUNG Cadre 5 postes LS990

Available colors :

• Ivory
• Black
• Light grey
• White
• Titanium
• Dark
• Aluminium
• matt black
• matt white

Sealing gasket

• Achieves protection class IP 44.
• Can be used with all 500 series mechanisms, rotary and timer switches, with covers marked with a blue square "IP 44".
• If necessary, to be completed with sealing element according to the device description.

JUNG Amplifier LED ULZ1755REG

rail mounting device, 2 rail units

Intended use

• Power extension of the listed dimmers (ref.-no.: UD 1755 REG, 1730 DD, 1731 DD, 1710 DE, 1711 DE, 1712 DE, FM UD 20250 UP, FM UD 5500 REG, FM UD 420250 REG, 3901 REGHE, 3902 REGHE, 39004 1S R)
• Mounting on DIN rail according to EN 60715 in distribution box

 
Product characteristics

• Connection of several amplifiers to a single dimmer
• The total power of the connected loads is divided between the dimmer and amplifiers
• Power is supplied to the connected loads via a common power cable
• Operation using upstream dimmer
• Electronic over-temperature protection
• Optional accessory: compensation module LED, ref.-no.: KM LED 230 U