Schneider - D-Life  Dimmer 230 V 100W - CCT99100

The universal LED dimmer is suitable for installation in a deep recessed
recessed box. The dimmer module is
controlled via mechanical pushbuttons in parallel
parallel operation. Resistive, capacitive and inductive loads
and inductive loads can be switched and varied.

Schneider - D-Life - 1 gang rocker  -MTN3300-

Cover for D-Life,  1gang switch, 1 gang push-button, 1 gang......

Schneider - D-Life - socket - FR - mechanism and cover -MTN2500-

Frame and surface mounting box sold separately:

-1gang-Frame

-Schneider-D-Life-1-post - surface mounting box

Schneider - D-Life - Toggle mechanism - 10A - MTN3116-0000

This Merten MTN3116-0000 switch from Schneider Electric is a switch with 1 rocker. It is part of the D-Life range with an innovative and elegant design. It guarantees refined premises and interiors. It is mounted using screws and claws. The switch is made of metal and plastic, making it extremely robust. Its rated current is 10 AX. It's also a high-quality, environmentally-friendly product, manufactured without substances of very high concern. Compatible with Merten System M, Merten Artec, Merten Antique.

Schneider - KNX - Presence detector 360° - KNX - Mini Flat - white - MTN6303-0019

35 mm flush-mounted diameter

Cover diameter 43 mm

The Schneider Electric MTN6303-0019 KNX motion detector is white and has a front and side detection sensor. Its mounting box can be flush-mounted. Manufactured with respect for the environment, it contains no mercury or heavy metals. Made of plastic, this presence detector is hard-wearing.

Schneider - KNX - Touch Screen - 4 ''- MTN6215-0410

SpaceLogic KNX, 4 inch touch screen, control and display.

Exclusively delivered with a black frame.


Schneider Electrice's 4" touch screen is the nerve centre of your connected space. Simplified control of all connected systems: lights, blinds, ventilation, underfloor heating. This 4" screen can be installed in the same way as a D-Life range device. This product consists of a customisable 4" touch screen displaying widgets, with an integrated temperature sensor. Up to 9 customisable screens display widgets, allowing you to choose from a multitude of function combinations. The screen comes to life at the slightest movement thanks to its proximity sensor. Its built-in temperature sensor can be used as a thermostat. Its sleek, elegant design blends in perfectly with modern installations. This product is Green Premium certified.

Schneider - KNX Corridor presence detector FM - MTN6305-0019

68 mm flush-mounted diameter

Cover diameter 120 mm

KNX presence detector for flush-mounted installation in long corridors.
The presence detector detects the presence of persons even in the case of small movements.
Control of the lighting is carried out dependent on movement (2 channels) or additionally dependent
on brightness (1 channel) via KNX telegrams. If there is sufficient daylight, the lighting
is switched off or adapted to a detection brightness (constant light regulation).
Devices for heating, ventilation or air conditioning (HVAC) can also be controlled (1 channel).
The presence detector has two detection sensors (passive infrared), a brightness sensor,
an IR receiver and an LED to indicate a detected movement, in test mode indication of the
activated programming mode.
The presence detector can be used as a single detector or in master-slave mode. The setting
is carried out in the ETS.
The presence detector can also be set and tested without the ETS, but with the appropriate
remote control (available as an accessory).
Indoor installation on ceiling (IP 20) on flush-mounted housing with two screws.

Schneider - KNX secure IP Interface - MTN6502-0105

This device from the Spacelogic KNX range is an IP Interface DIN Rail. The Spacelogic KNX IP Interface is an interface between IP and KNX. You can access the KNX Bus from every point of your LAN. The Spacelogic KNX IP Interface can be used as a programming interface for ETS 5 Software and allows to access the KNX bus over the Internet via a VPN. The device supports KNX Security which can be enabled in ETS. With its interface functionality (tunneling) KNX security prevents unauthorized access. The device supports up to 8 tunneling channels. For each tunneling channel, a separate individual address must be configured. The device is delivered with 2 integrated push-buttons to select the tunneling channel and 3 status LEDs. The Interface is powered by the KNX bus. An additional power supply is not needed. It allows mounting on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. This application requires ETS 5 or higher. The LAN network is connected via the RJ45 socket. The width of the device for 1 module is about 18mm. The device is delivered with bus connecting terminal and cable cover.