JUNG Glass Panel with 24 push-button sensor-IP54-KNX with status LED-MBT2424WW

Installation (IP54) in a double horizontal box (diameter 68mm), fixed by 4 screws.

Product characteristics:

- color: White

- Dimensions front plate: Width:236mm-Height:156mm-Depth:14mm

- Installation Depth: approx 39mm

- Push-button functions switching, dimming, controlling blinds, value transmitter,
calling up light scenes etc.
- High quality glass surface with 24 sensor buttons
- Operation via touching the sensor buttons
- Labelling with exchangeable labelling foil
- Status indication with 24 LEDs; the colours red, green and blue can be configured
- Acoustical feedback for touching sensor
- Fault message on dismantling
- Logic and time functions
- Integrated bus coupling unit
- Supply via separate power supply or the auxiliary voltage
output of the KNX power supply

Hinged lid with spring

• for 50 x 50 mm system
• It is necessary to use JUNG cover 50x50 with JUNG Mechanism 2-pole socket outlet.

Hinged lid with spring, colors available:

• Ivory
• Black
• Light grey
• White
• Titanium
• Stainless steel
• Dark
• Aluminium
• Matt black 9005
• Frosted matte black 
• Light rust
• Frosted rust

JUNG KNX 4 channels-Dimmer Actuator 1-10 V- 2194REGHM

rail mounting device, 4 rail units
ETS product family: Illumination
Product type: Dimmer

Intended use

• Switching and brightness setting for lamps with operating devices with 1-10 V interface
• Switching of electrical loads
• Mounting on DIN rail according to EN 60715 in distribution box

 
Product characteristics

• Manual switching of the relays is independent of the bus
• Switching of capacitive loads and the resulting high switch-on currents
• Flexible assignment of control inputs to switching outputs, e.g. to control RGBW lamps
• Operation of the switching outputs as a switching actuator
• Connection of different line conductors possible
• No additional power supply necessary
• Feedback of switching state and brightness value
• Switch position indication
• Burn-in function for fluorescent lamps
• Switch-on and dimming behaviour can be set
• Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function
• Integration into light scenes
• Operating hours counter

Jung KNX LED controller 5 Ways - 390051SLEDR

rail mounting device, 4 rail units
with manual electronic operation and LED status indication
Project design and commissioning with ETS5 or a more recent version
ETS product family: Illumination
Product type: Dimmer

Intended use
Dimmer for controlling LEDs, LED modules, LED spots, halogen lamps and incandescent lamps with 5 V ... 48 V (pulse width-modulated PWM)
Mounting on DIN rail according to EN 60715 in distribution box
 
Product characteristics
Dimmer for colour temperature and coloured light control (RGB/HSV)
Different dimming characteristics settable (soft dimming, deep-down dimming)
PWM frequency settable (211 ... 1200 Hz)
Commissioning with display support
Free configuration of the channels
Integrated scenes and bit scenes
Predefined and freely-definable sequences
Time-controller dimming or Human Centric Lighting (HCL)
Staircase lighting function
Disabling function
Measurement and meter function
Diagnosis/indication of protection function via KNX group addresses and on display
Electronic over-temperature protection
Protection function for LED modules and power supply
KNX Data Secure compatible with ETS 5.7.3 or higher

JUNG light-dimmer 4 outputs KNX Modulaire 4 X 200 W OU 4 X 35 W EN LED TYPE GU10 390041SR

4 x 225 W, HV LED lamps typ. 4 x 1 ... 35 W (leading edge phase control), 4 x 1 ... 200 W (trailing edge phase control)
1 x 855 W
rail mounting device, 4 rail units
with manual electronic operation and LED status indication
Project design and commissioning with ETS5 or a more recent version
ETS product family: Illumination
Product type: Dimmer

JUNG KNX power supply, 320 mA 20320REG

rail mounting device, 4 rail units
ETS product family: System components
Product type: Power supply

Intended use

• Supplying KNX devices with bus voltage
• Supplying devices with DC voltage
• Mounting on DIN rail according to EN 60715 in distribution box

JUNG KNX power supply, 640 mA 20640REG

rail mounting device, 4 rail units
ETS product family: System components
Product type: Power supply

Intended use

• Supplying KNX devices with bus voltage
• Supplying devices with DC voltage
• Mounting on DIN rail according to EN 60715 in distribution box

JUNG KNX room controller LS TOUCH

with integrated 1-gang frame LS 990
Only install as a single device, not suitable for combinations!

 63 Le Corbusier colours available on request.

Intended use

• Operating loads and displaying the status of systems and information e.g. light switching, dimming, controlling blinds/shutters, temperature and consumption values etc.
• Measurement and feedback control of the room temperature
• Installation in flush box with dimensions according to DIN 49073