Skip to content

Zennio MAXinBOX 16 V3 - MAXinBOX 16 Plus Actuator 16 outputs KNX ZIOMB16V3 - ZIO-MB16P

Ref.: ZIOMB16V3-ZIO-MB16P

Zennio

Availability: In Stock Out of stock
Special Price: 394.20 € Regular Price: 394.20 €

Zennio MAXinBOX 16 V3 - MAXinBOX 16 Plus  Actuator 16 outputs KNX ZIOMB16V3 - ZIO-MB16P

MAXinBOX 16 V3 is replaced by the previous version MAXinBOX 16 Plus

Check in the PDF Retrieved references & Temporary references in Documents

 

The replacement of the product is due to the worldwide out-of-stock situation of components that we are experiencing and that forced us to change the microcontroller by another of the same model but different capacity to ensure the continuity of deliveries.

Characteristics:

  • Mounting on DIN rail (EN 50022), pressurized.
  • Does not require a power supply other than the bus power supply.
  • Integrated BCU KNX bus coupling unit
  • Equipped with 8 action channels configurable as:
    • shutter channels (up to 8)
    • individual outputs (up to 16)
  • Independent manual control by output with push button and LED status indicator.
  • Includes logic functions
  • Delay on outputs
  • Full data backup in case of power loss
  • Withstands capacitive loads, maximum 140 µF.
  • Complies with EC directives.

SAFETY INSTRUCTIONS

  • Do not connect the main voltage (230V) or other external voltages to the KNX data bus.
  • Connecting an external voltage can endanger the electrical safety of the entire KNX system.
  • Use rigid cable to connect the outputs or flexible cable with terminals (spikes).
  • Always check during installation that there is sufficient insulation between the 230V main voltage conductors and the conductors of the Bus and its extensions.
  • It is possible to connect several phases, making sure that each phase is on a different terminal block (block 1, block 2, block 3 and block 4).
  • Once the device has been installed, the output terminals must not be accessible.

  • Width (nb of DIN rail modules) : 8 modules
  • Tension de fonctionnement : 230 V
  • Connection type : Bus KNX
  • Height : 90 mm
  • Width : 190 mm
  • Depth : 60 mm
  • Additional informations : Warning, this product is not plug and play, it requires programming with ETS4 or ETS5 software. LIGHT & DOMOTIQUE can handle this programming if you wish, please contact us first to get a quote.
Add your comment
Only customer are allowed to publish comment
Comments