Interra Just Touch ITR328-1001 : 

• Pushbutton has Switching, toggle, dimming, shutter/blinds, thermostat controls, scenes, value, 2 channels, step switching mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heating and Cooling modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC), CO2 concentration (from bus), humidity percentage, operating modes, fan levels, on/off indicators, warnings and locking status are displayed on screen.
• Fan controller available with different speed indicators.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature, humidity and air quality levels.
• RGB LED control.

Siemens KNX  room thermostat - RDF800KN - RDF800KN/VB

Flush mount touch KNX room thermostat for 2-/4-pipe FCU with on/off output and 2x universal input, fit for both round and square conduit boxes

CJC - LUCIA - KNX - 1 way - CJC7201

Delivery time 8 weeks, manufactured to order.

The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation

CJC - LUCIA - KNX - 2 way - CJC7202

Delivery time 8 weeks, manufactured to order.

The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation

CJC - LUCIA - KNX - 4 way - CJC7204

Delivery time 8 weeks, manufactured to order.

The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation

Eelectron OL-U - KNX switch - regular version - SO08A01KNX

The switch SO08A01KNX of the OL-U® KNX® series for wall installation is equipped with up to 8 mechanical buttons (16 channels) for managing on/off commands, dimmers, rolling shutters and venetian blinds, or other programmable command and control functions. The device can be configured via the ETS® application program and can communicate with the KNX Data Secure protocol.

Frame and buttons covers sold separately:

- Eelectron OL-U - 1 gang frame

- Eelectron OL-U - kit 8 buttons

Ekinex - KNX switch - basic version - FF serie - EK-E32-TP - NO LED)

The 4-fold pushbutton of Ekinex® FF series commands loads on/off switching, controls the dimming of lighting devices, controls motor drives for shutters or executes any other programmable command and control function. The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is supplied by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.

Frame and buttons covers sold separately:

- Ekinex - 1 gang frame

- Ekinex - kit 4 buttons

JUNG-F40-universal push-button module 2-gang-42921 ST

4-gang control panel-42921 ST replaces 4192 TSM, key frames and covers remain the same.

for cover kit 2-gang, ref.-no.: .. 402 TSA ..
for cover 2-gang with symbols, ref.-no.: .. 402 TSAP ..
can be extended by means of a push-button extension module, ref.-no.: 409.. TSEM
Adapter frames are included in delivery:
ref.-no. LS 4 AR for LS range (pre-mounted) and ref.-no. CD 4 AR for CD range.
AS / A ranges without adapter frame.
Only with ETS 5.7.7 or later versions or ETS6.0.6 or later versions the full functionality will be available.
ETS product family: Push-button
Product type: 2-gang push-button
1 blue LED: operation indication