switches
-
CJC - LUCIA - KNX - 1 way - CJC7201
CJC - LUCIA - KNX - 1 way - CJC7201
Delivery time 8 weeks, manufactured to order.
The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation432.00 € -
CJC - LUCIA - KNX - 2 way - CJC7202
CJC - LUCIA - KNX - 2 way - CJC7202
Delivery time 8 weeks, manufactured to order.
The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation460.80 € -
CJC - LUCIA - KNX - 4 way - CJC7204
CJC - LUCIA - KNX - 4 way - CJC7204
Delivery time 8 weeks, manufactured to order.
The LUCIA collection exists in three touch pad configurations. Besides the single touch pad, also a 2 and 4 touch pad version will be available. The
switches can be used with impulse relays (installed in the electrical board) or with different brands of home automation systems and with a KNX system.
The touch pads are able to detect several gestures from the user and process them into different outgoing signals:
• Single short tap (e.g. turning on/off)
• Single long tap (e.g. dimming, enter into another function, …)
• Double tap (e.g. )
• Sliding (e.g. dimming, moving to another function,…)
The touch pads are translucent and are able to generate feedback light by RGB-leds, e.g.
• On/off
• Orientation510.00 € -
Interra black Just Touch ITR328-1001
Interra Just Touch ITR328-1001 :
• Pushbutton has Switching, toggle, dimming, shutter/blinds, thermostat controls, scenes, value, 2 channels, step switching mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heating and Cooling modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC), CO2 concentration (from bus), humidity percentage, operating modes, fan levels, on/off indicators, warnings and locking status are displayed on screen.
• Fan controller available with different speed indicators.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature, humidity and air quality levels.
• RGB LED control.380.00 € -
Interra white Just Touch ITR328-1002
Interra Just Touch ITR328-1002 :
• Pushbutton has Switching, toggle, dimming, shutter/blinds, thermostat controls, scenes, value, 2 channels, step switching mode features.
• Locking feature available for each button and complete device
• On/Off (2-points) and Proportional (Continuous or PWM) thermostat functions.
• Comfort, standby, economy and building protection operating modes.
• Manual or Automatic switching between Heating and Cooling modes.
• Temperature measuring through integrated sensor with possibility of sending the value on change and periodically to the bus.
• Temperature (measured, external, setpoint, outdoor values as ºC), CO2 concentration (from bus), humidity percentage, operating modes, fan levels, on/off indicators, warnings and locking status are displayed on screen.
• Fan controller available with different speed indicators.
• Relative humidity measuring through the integrated sensor with possibility of sending the value on the bus.
• Threshold alarm define for temperature, humidity and air quality levels.
• RGB LED control.380.00 € -
JUNG Dual KNX push button with LED indicator - center point 4072.02 LED
KNX push button BCU - middle position -
Function: ON/OFF, roller shutters, variation
LED: always OFF/always ON/LED object, LED presentation
The LED is intended for orientation or status indication, adjustable through the
parameters.Operating exemple :
- OFF/ON KNX General lighting control and a roller shutter
or - Control of 4 lights ON/OFF function
or - Control of 2 lights ON and OFF function
- Control of 2 lights ON/OFF/Dimmer function
- Control of 2 roller shutter
The JUNG BP/BCU mechanisms are fitted with the finishing trims of the AS, A series, CD, SL and LS (SL series only button position).
Depending on the model of BP/BCU (1-way or 2-way) it is possible to use single or double button covers with or without indicator light.
Two white LEDs are intended to become orientation or status information depending on the selected parameters.
The "intermediate position" version can carry out a command by pressing the button up and down, whereas the "button position" version can only carry out a command by pressing the button down.
The BP/BCU operate with an application, i.e. they consist of a mechanism (hardware) and a program (software). With the aid of the application program it is possible to parameterize the functions and link group addresses (see JUNG database).Please note that not all covers are compatible with this pushbutton. Here is a list of compatible covers in our catalogue:
- dual cover with indicator light
And in order to complete your knob, it is necessary to have a finishing frame. Below is the list of availability in our catalogue:
- 1-gang
- 2-gang
- 3-gang
- 4-gang
- 5-gang
73.00 € - OFF/ON KNX General lighting control and a roller shutter
-
JUNG Glass Panel with 24 push-button sensor-IP54-KNX with status LED-MBT2424SW
JUNG Glass Panel with 24 push-button sensor-IP54-KNX with status LED-MBT2424SW
Installation (IP54) in a double horizontal box (diameter 68mm), fixed by 4 screws.
Product characteristics:
- Color: Black
- Dimensions front plate: Width:236mm-Height:156mm-Depth:14mm
- Installation Depth: approx 39mm
- Push-button functions switching, dimming, controlling blinds, value transmitter,
calling up light scenes etc.
- High quality glass surface with 24 sensor buttons
- Operation via touching the sensor buttons
- Labelling with exchangeable labelling foil
- Status indication with 24 LEDs; the colours red, green and blue can be configured
- Acoustical feedback for touching sensor
- Fault message on dismantling
- Logic and time functions
- Integrated bus coupling unit
- Supply via separate power supply or the auxiliary voltage
output of the KNX power supply1 168.00 € -
JUNG Glass Panel with 24 push-button sensor-IP54-KNX with status LED-MBT2424WW
JUNG Glass Panel with 24 push-button sensor-IP54-KNX with status LED-MBT2424WW
Installation (IP54) in a double horizontal box (diameter 68mm), fixed by 4 screws.
Product characteristics:
- color: White
- Dimensions front plate: Width:236mm-Height:156mm-Depth:14mm
- Installation Depth: approx 39mm
- Push-button functions switching, dimming, controlling blinds, value transmitter,
calling up light scenes etc.
- High quality glass surface with 24 sensor buttons
- Operation via touching the sensor buttons
- Labelling with exchangeable labelling foil
- Status indication with 24 LEDs; the colours red, green and blue can be configured
- Acoustical feedback for touching sensor
- Fault message on dismantling
- Logic and time functions
- Integrated bus coupling unit
- Supply via separate power supply or the auxiliary voltage
output of the KNX power supply1 168.00 €