Multifunction and shutter actuators

Zennio ShutterBOX Drive 4CH- 4-Channel Shutter Actuator - ZIOSHD4

4-Channel Shutter Actuator with automatic travel time measurement and KNX Secure.

4-channel shutter actuator for DIN rail (4 units), which allows automatic travel times measurement through current detection.
It includes 6 alarms per channel, a module of 20 logic functions and allows manual control of the outputs with LED status indication. Among its complete functionality, the event-driven automatic control stands out, calculating the position of the sun at each moment to be able to adjust the position of the shutter and the slats.
It is compatible with KNX Secure.

212.40 €

Zennio ShutterBOX Drive 2CH- 2-Channel Shutter Actuator - ZIOSHD2

2-Channel Shutter Actuator with automatic travel time measurement and KNX Secure.

2-channel shutter actuator for DIN rail (2 units), which allows automatic travel times measurement through current detection.
It includes 6 alarms per channel, a module of 20 logic functions and allows manual control of the outputs with LED status indication. Among its complete functionality, the event-driven automatic control stands out, calculating the position of the sun at each moment to be able to adjust the position of the shutter and the slats.
It is compatible with KNX Secure.

149.40 €

Elsner KNX Control Module for Door Drives KNX A3-B2

Elsner Module de commande d’entraînement de porte KNX A3-B2

Module de commande d'entraînement de porte KNX avec 3 sorties et 2 entrées binaires

198.00 €

Ekinex - Universal interface 4 Input - 2 Output (5A) EK-CE2-TP

Ekinex - Universal interface 4 Input - 2 Output (5A) EK-CE2-TP

Description

The Ekinex® universal interface EK-CE2-TP is a KNX device which can be used as input and/or output module. The device is equipped with:

4 inputs to connect the KNX bus to switches, pushbuttons or classic sensors (normally not communicating on the KNX bus) or any binary signals from other devices, in order to control KNX bus functions. In addition, one input is configurable as analog to connect a NTC temperature sensor (10 kΩ a 25 °C);
2 5A relay outputs to be used as electrical load control (independent) or paired for shutter and blind actuator control.

The voltage for polling the inputs is supplied within the device. The device integrates a KNX bus communication module and is realized for flush-mounting or for mounting on a standard 35 mm DIN-rail. The device is powered by the KNX bus and does not require auxiliary power supply.

Power supply

30 Vdc power supply by KNX bus
Current consumption from bus < 10 mA

219.60 €

Zennio inBOX 20 V3 Actuator for flush mounting 2 outputs ZIOIB20V3

Multifunction actuator for flush mounting with 2 outputs (16 A C-Load) which offer multiple configurations as shutter channel or individual outputs. It allows manual control of its outputs and includes 10 independent logical functions. Accessories: AC/DC shutter adapters.

86.40 €

Zennio inBOX 24 v3 Multifunction actuator for flush mounting with 2 outputs (16 A C-Load) and 4 analog-digital inputs ZIOIB24V3

Multifunction actuator for flush mounting with 2 outputs (16 A C-Load) which offer multiple configurations as shutter channel or individual outputs. It allows manual control of its outputs and includes 4 thermostats, 10 independent logical functions and Master-Light function. In addition, it incorporates 4 analog-digital inputs that may be configured as binary inputs for sensors and potential-free push buttons, as temperature probe inputs or as motion sensor inputs.
Accessories: Temperature probes, motion sensor and AC/DC shutter adapters.

105.00 €