Interra 1 channel KNX-DALI Gateway ITR832-001

KNX - DALI Gateway w/ Ethernet (1x64 DALI)

ITR832-0001 is a single-channel KNX-DALI interface device used as an interface between DALI and KNX installations, enabling communication between the two protocols.

DALI devices (ballasts, etc., ECGs) that are connected to the line are supplied with the internal DALI power supply. Up to 1x64 DALI ballasts can be connected and 16 groups, 16 scenarios and 64 devices can be controlled with each DALI channel. It is also compatible with DT0, DT1, DT6, DT8-TC, DT8-RGB, DT8-RGBW. out of.

In addition, independent emergency lighting according to EN 62386-202 is supported and emergency lighting tests (e.g. function and time tests) can be triggered via the KNX cable. Feedback can also be sent to the KNX line. Each DALI device can be controlled individually, in a group or via broadcast control.

Interra 2 channels KNX-DALI Gateway ITR832-0002

KNX - DALI Gateway w/ Ethernet (2x64 DALI)

ITR832-0002 is a dual-channel KNX-DALI interface device used to provide an interface between DALI and KNX installations, enabling communication between the two protocols. 

DALI devices (ballasts, etc. ECGs) connected to the line are supplied with the internal DALI power supply. Up to 2x64 DALI ballasts can be connected and with each DALI channel, 16 groups, 16 scenarios, and 64 devices can be controlled. It's also compatible with DT0, DT1, DT6, DT8-TC, DT8-RGB, DT8-RGBW.

In addition, independent emergency lighting according to EN 62386-202 is supported and emergency lighting tests (e.g. function and time test) can be triggered via the KNX line. Also, feedback on the KNX line can be sent. Each DALI device can be controlled individually, in a group, or broadcast control.

Schneider KNX - DALI Broadcast Master 4 channels/32, Secure-MTN6725-0005S

Can be installed in combination with the extension actuator (to obtain DALI Broadcast Master 4 ch/32  and  8 outputs (8 ch ON/OFF or 4 ch Up/Down)):

Schneider KNX - Switch-blinds actuator 8 outputs - extension - MTN6805-0008

 If your extension is not side by side with the master or the second extension you can use this cable:

Schneider KNX Cable flexible

 The SpaceLogic KNX DALI Gateway Broadcast Master 4 channel/32 is a single-master application control-ler for controlling electronic ballasts with up to four DALI interfaces via the KNX installation bus. It supports ballasts according to EN 62386-102 ed1 (DALI1) as well as devices according to EN 62386-102 ed2 (DALI2).
The device transforms switching, dimming and colour control commands from the connected KNX system into corresponding DALI broadcast telegrams.
The SpaceLogic KNX DALI Gateway Broadcast Master has 4 DALI channels which can control up to 128 ECGs (each DALI channel supports 32 ECGs).
The required power supply for the connected ECGs is provided directly from the device. Additional DALI power supplies are not required and not allowed.
The gateway is checking the number of connected ECGs automatically. If more than 32 ECGs are con-nected to one channel, the channel stops working and generate an overload failure.
The device is available in a 4TE wide DIN rail housing for direct installation in an electrical distribution board. The bus connection is made via a standard KNX bus connector. Mains and DALI lines are con-nected via screw terminals on the device.
Per gateway the ECGs can be controlled in 4 Dali bus lines.
In addition to the pure gateway functions, the SpaceLogic KNX DALI Gateway Broadcast Master offers nu-merous additional features:
• General adjustable Soft-Start Behaviour for ECGs
• Coloured light control with the support of Device Type 8 (DT-8) ballasts and control via communication objects
• Coloured light control depending on ballast Sub-Type:
• Colour Temperatur (DT-8 Sub-Type Tc)
• RGB (DT-8 Sub-Type RGBWAF)
• HSV (DT-8 Sub-Type RGBWAF)
• RGBW (DT-8 Sub-Type RGBWAF)
• Automatic change of colour temperature depending on the light value (Dimm-To-Cold)
• Various operating modes such as normal, night and staircase mode
• Individual time settings for staircase mode, switch-on and switch-off delays
• Specially adjustable behaviours for alarm and lock situations for each channel

Theben - Flush-mounted 1-way DALI actuator- 4942580 - DU 1 DALI KNX

Function description

• Flush-mounted 1-way DALI actuator, KNX TP, Data Secure
• DALI-2 certified
• Interface between the DALI and the KNX bus system
• Simple commissioning of up to 30 ECGs in broadcast mode
• Control of RGB, RGBW, Tunable White or conventional luminaires
• DT-8 luminaire support
• Easy replacement of ECGs in the event of a fault
• Universal mounting thanks to the compact housing
• 2 binary inputs for potential-free contacts such as pushbuttons, switches, window contacts, temperature sensor (input I2)
• The binary input I1 is assigned to the output ex works (function test and operation even without programming)

Zennio inBOX DALI 16-ZDIIBD16

KNX-DALI Interface for flush mounting to control up to 16 DALI independent ballasts, simply with KNX power supply, with no need of auxiliary power supply. It includes ETS DCA for easy start up (ballasts, groups and replacement addressing). Ballasts can be associated in up to 16 groups, or individually. Possibility to manually switch all dimming points of the channel.
Compatible with emergency lighting (DT1), color ballasts (DT8) and energy monitoring (DT51 – part 252).
Device certified as Multi Master DALI-2 controller, compatible with DALI inputs.
It is compatible with KNX Secure.

Zennio DALIBOX Broadcast 6CH V2 ZDIDLB6V2

KNX-DALI broadcast interface module for DIN rail mounting (4.5 units). It incorporates 6 channels controlled via broadcast commands, allowing a total of 64 ballasts per channel, including color ballasts (DT8). In addition, it allows the configuration of 20 scenes/sequences per channel. It is compatible with KNX Secure. It enables manual control and has LED status indicators per channel.

Zennio DALIBOX Broadcast 4CH V2 ZDIDLB4V2

KNX-DALI broadcast interface module for DIN rail mounting (4.5 units). It incorporates 4 channels controlled via broadcast commands, including color ballasts (DT8). It allows to connect up to 250 ballasts per device, and they can be associated as whished with up to 64 ballasts per channel. In addition, it allows the configuration of 20 scenes/sequences per channel. It is compatible with KNX Secure. It enables manual control and has LED status indicators per channel.

Zennio DALI BOX Interface 64 X2 - ZDID64X2

KNX-DALI Interface for up to 64 ballasts per channel - 2 channels

KNX-DALI Interface for DIN-rail (4.5 units) with two independent DALI channels, to control up to 64 DALI ballasts per channel, which can be associated in up to 16 groups per channel. In addition to groups control, each ballast can be controlled individually, being able to create groups of ballasts via KNX. It includes a display and ETS DCA for easily addressing when a ballast is replaced, that also helps assigning ballasts to groups. Error indicators for each ballast.
It allows the lighting control of emergency (DT1) and color ballasts (DT8).
Device certified as Single Master DALI-2 controller.
It is compatible with KNX Secure