Skip to content

Input module

  • Interra 6 channels Universal interface ITR106

    Interra ITR106 :

    Description : 

    ITR106 device is used to interface the contacts to KNX bus substructure such as push buttons, switches etc. to make them communicating devices.

    Configuration and features : 

    • The complete configuration of the device is performed via ETS3 or higher.
    • Depending on ETS configuration and settings the product feature will be different.
    • Avaialble functions are:
      • Switching
      • Dimming
      • Toggle
      • Blind Control
      • 2 Channel
      • Value Selected
    • Most of functions only need one input and therefore each input might be assigned a different function. However there are also some functions which use two inputs such as “Dimming with 2 buttons” and “Shutter/Blinds with 2 buttons”.

    Mounting, commissionning and safety notes : 

    • The device may only be installed and put into operation by a qualified electrician or authorized personnel.
    • The device is inserted in a flush-mounted combined joint box.
    • The installation location should not be in the outdoor area.
    • The voltage potentials on the lines connecting the contacts are not electrically isolated from the bus voltage.
    • Permitted cable length can be up to 5 meters and unused wires should be insulated.
    • Avoid contact with liquids and corrosive gases.
    • Do not get wrong connection for KNX Black and Red wires.
    • Please do not forget to recheck all connections after installation

    54.00 €

  • Zennio Quad Plus - Input module with 4 analog-digital inputs - ZIO-QUADP

    Zennio Quad Plus - Input module with 4 analog-digital inputs - ZIO-RQUAD8

    Analog/digital sensor. QUAD Plus is an analog/digital sensor that offers a large variety of functionality. Its 4 optocoupled multi-function inputs may be configured as digital inputs for sensors and potential-free push buttons, as temperature probes or as a motion sensor. Four room thermostats for heating/cooling control systems included. Accessories: Temperature probes and motion sensor.

    82.20 €

  • Ekinex - Universal interface 4 Input - 2 Output (5A) EK-CE2-TP

    Ekinex - Universal interface 4 Input - 2 Output (5A) EK-CE2-TP

    Description

    The Ekinex® universal interface EK-CE2-TP is a KNX device which can be used as input and/or output module. The device is equipped with:

    • 4 inputs to connect the KNX bus to switches, pushbuttons or classic sensors (normally not communicating on the KNX bus) or any binary signals from other devices, in order to control KNX bus functions. In addition, one input is configurable as analog to connect a NTC temperature sensor (10 kΩ a 25 °C);
    • 2 5A relay outputs to be used as electrical load control (independent) or paired for shutter and blind actuator control.

    The voltage for polling the inputs is supplied within the device. The device integrates a KNX bus communication module and is realized for flush-mounting or for mounting on a standard 35 mm DIN-rail. The device is powered by the KNX bus and does not require auxiliary power supply.

    Power supply
    • 30 Vdc power supply by KNX bus
    • Current consumption from bus < 10 mA

    219.60 €

  • Zennio BIN-T 2X Universal Interface 2 binary inputs/LED outputs ZIOBINT2

    Zennio BIN-T 2X Universal Interface 2 binary inputs/LED outputs and 1 temperature sensor input. ZIOBINT2

    BIN-T 2X is a module with 2 configurable channels as binary inputs or LED outputs. Binary inputs can be configured as sensors, potential-free switches or push buttons. Binary outputs can be used for low current LED control. In addition, it incorporates 1 temperature probe input and 1 room thermostat to control heating/cooling systems. It is compatible with KNX Secure. Installation in standard mounting box. Accessories: temperature probe.

    42.00 €

  • Zennio BIN-T 4X Universal Interface 4 binary inputs/LED outputs ZIOBINT4

    Zennio BIN-T 4X Universal Interface 4 binary inputs/LED outputs and 1 temperature sensor input. ZIOBINT4

    BIN-T 4X is a module with 4 configurable channels as binary inputs or LED outputs. Binary inputs can be configured as sensors, potential-free switches or push buttons. Binary outputs can be used for low current LED control. In addition, it incorporates 1 temperature probe input and 1 room thermostat to control heating/cooling systems. It is compatible with KNX Secure. Installation in standard mounting box. Accessories: temperature probe.

    50.40 €

  • Zennio BIN-T 6X Universal Interface 6 binary inputs/LED outputs ZIOBINT6

    Zennio BIN-T 6X Universal Interface 6 binary inputs/LED outputs and 1 temperature sensor input. ZIOBINT6

    BIN-T 6X is a module with 6X configurable channels as binary inputs or LED outputs. Binary inputs can be configured as sensors, potential-free switches or push buttons. Binary outputs can be used for low current LED control. In addition, it incorporates 1 temperature probe input and 1 room thermostat to control heating/cooling systems. It is compatible with KNX Secure. Installation in standard mounting box. Accessories: temperature probe.

    58.20 €

  • Zennio BIN-T 8X Universal Interface 8 binary inputs/LED outputs ZIOBINT8

    Zennio BIN-T 8X Universal Interface 8 binary inputs/LED outputs and 1 temperature sensor input. ZIOBINT8

    BIN-T 8X is a module with 8X configurable channels as binary inputs or LED outputs. Binary inputs can be configured as sensors, potential-free switches or push buttons. Binary outputs can be used for low current LED control. In addition, it incorporates 1 temperature probe input and 1 room thermostat to control heating/cooling systems. It is compatible with KNX Secure. Installation in standard mounting box. Accessories: temperature probe.

    86.10 €

Contact

Delivery in France, Europe and worldwide.

Our payment methods